Lots of parts

[scott.mohekey]

Relisting some of what's in my lock up (all that I can remember).

1x non vr4 transfer case
1x vr4 transfer case
1x complete type s vr4 rear subframe (including ayc diff, pump, and reservoir)
1x ayc diff and mount
1x manual conversion kit (includes everything but the center shaft)
1x hi vis auto gauge cluster
3x a/c pump
2x p/s pump
1x set of stock vr4 pistons and rods
1x set of white doors
1x pair of pfl legnum rear half skirts
1x pair of galant rear half skirts (might be fl legnum, not sure)
1x 6a13 NA engine complete (minus accessories, but they're listed above)
1x set of stock pfl vr4 wheels
2x prop shafts
1x unidentified subaru prop shaft

various looms and lots of other stock vr4 parts (intercooler etc)

Make me an offer on anything.. or swap the lot for an LS1/LQ4 v8 ;)

[Gly]

re : ps and ac pumps,

pre or post facelft as there specific to each and not interchagible.

[scott.mohekey]

They're all pfl. However you can fit a pfl ps pump to a fl if you use the pfl mounting bracket and piping. Not sure about fitting pfl ac pumps to fl cars though.

[Josh2xsv]

The Legnum rear half skirts (those are the stubby skirt behind rear wheels a?) What colour are they?
Chrs
J

[scott.mohekey]

I can try and get hold of a center shaft for you from Q (VR4WGN). You're looking at $1800 for the lot.

[chchthomo]

scott you have pm

[scott.mohekey]

How much do you want for the Manual Conversion Kit and to find a centre shaft?
Anyone got one?
Oh and the Legnum rear half skirts (those are the stubby skirt behind rear wheels a?) What colour are they?
Chrs
J

The rear half skirts are fibreglass with a white gelcoat finish.

[scott.mohekey]

Bump

I have some more stock now. Another complete AYC setup and prop shaft.

[Hotwire]

Any airbox / snorkel assemblies for a VR4?

[scott.mohekey]

Just sold my last airbox (and even then it was an STR one). I have a snorkel or two lying about though.

[Hotwire]

OK will keep it in mind if I find an airbox without snorkel ;)

[wintertidenz]

I will be making a CAD drawing of an airbox when I get one, so you guys can take the design to a shop and get one made, or make one yourself.

[VR4WGN]

price on vr4 X-fer and manual convert kit please and maby ayc diff too

[scott.mohekey]

$200 for the transfer case.
$1800 for the manual conversion kit.
$500 for an ayc diff.

[VR4WGN]

ill take dibs on the xfer case for 22 May ish if thats ok with you?

[scott.mohekey]

Sure. I have two of them now if you're interested in a second.

[VR4WGN]

always... might look at a combo deal???

[VR4WGN]

you dont gotta low mileage engine do you??

[scott.mohekey]

Had one. I do have a NA 6A13 with around 120000 on it, but I think you're after a turbo?

[confusis]

any sparkie leads from the NZ engine?

[scott.mohekey]

any sparkie leads from the NZ engine?

Yes, its a complete engine. But I would rather sell it complete. Make an offer, you might be surprised (and then shocked at the shipping /pan).

[Adam.Findlay]

are the doors you have pearl white or flat white as you know my driver door have the three pin dents in them which frustrates the hell outa me.

[scott.mohekey]

Pretty sure they're flat white.. but then I'm colour blind. We can go have a look in the weekend if you want.

[Adam.Findlay]

yeah mate im keen as aye. just flick me a txt. they are off a facelift, i do think most of the facelifts are pearl

[VR4WGN]

k im taking your xfer cases ok!!! um might want your entire vr4 looms too

[Hotwire]

Just sold my last airbox (and even then it was an STR one). I have a snorkel or two lying about though.

I may be in need of one of those snorkels. How much for one shipped to AU?
(is there a difference in them? air box from a 2000 VR4 Type V)

[scott.mohekey]

The snorkels I have are non turbo ones, so the throat where it joins the air box is smaller and won't work with a turbo air box.

[Hotwire]

ahhh bummer :(

[Patryn999]

Do you still have that rear diff (AYC) for sale? Think I may have just eaten mine :S

[scott.mohekey]

Yep. I have three, two complete with axles, pumps, etc. Are you just after the diff?

[Patryn999]

Ah, don't entirely know whats wrong with it yet as I'm a little poor on the mechanical knowledge side of things. If its possible to get a price for full assembly and just diff that would be nice, as even if it is just the diff having spare parts in case of an boo-boo is always nice.

Cheers :)

EDIT: I'll be a bit more verbose:
When replacing the seal I had to re-do start of thread for wheel nut and I would feel a touch safer if I replaced that driveshaft as well, but I'm not infamously rich right now so couldn't afford another 200 just for peace of mind.

[scott.mohekey]

I might actually have a spare axle. I'd have to have a look though. How about you start off with just the diff and see how that goes for you.

[Patryn999]

Thanks. I'll definately start by taking the diff off your hands. I'll PM you my cell number in a second.

[Nato]

Hey do you have the engine cover ?? if so how much you after ?
my numbers 021 165 3674

cheers
Nathan

[scott.mohekey]

I have one left. It has a couple of small cracks in it, but no missing plastic.

[hayase]

I'm very very interested for your Hi Vis Dash / High Contrast Speedometer

is it 260 km/h version since ur using 6A13 NA?

well just check my thread to make sure it's same item I want to buy, I attached the image there

how much for it if it's 260 km/h version

[scott.mohekey]

I don't have any hi vis 260 km/h dashes.

[scottie2hotti]

I know it doesnt say but a Front bumper PFL or FL? any colour. prefer trigger mauve.

[scott.mohekey]

I have a red PFL bumper, but its a little tatty.

[thfelipeth]

how much do you want for the conversion kit?

[scott.mohekey]

$1800.

[kNuTz]

Did you find any clocks lying around at all?

[CANDEE]

Did you find any clocks lying around at all?
Dude,

We can fix your one for you in about 5 mins if its going the normal clock issues...

J

[kNuTz]

haha nah, just need a broken one to cut up...

[Gly]

1x pair of pfl legnum rear half skirts,

still FS??