View Full Version : Extensive Mivec Pictures
VR4WGN
06-05-2010, 11:54 AM
hi guys i have searched and not been too fortunate with my searches..:thinking2
im looking for closeup shots and clear shots of the Rear Firewall of the Mivec FTo, so i can see what i mmissing and where the vaccum lines etc are all going to,198km to a full tank is not economical for me lol....:furious3:
Nutter_John
06-05-2010, 11:59 AM
An you post this on a forum dedicated to vr4's , maby you should post this up on a forum :P
VR4WGN
06-05-2010, 08:28 PM
its in a GEN 8 isnt it??? comming from an EVO owner.. lol
pbaron
06-05-2010, 08:50 PM
You need to download and install a copy of the General Export version of ASA, this will show all of the piping etc as installed in EA4A VR-M wagons if it is 8G rather than FTO you are interested in. The Japan version of ASA will show the FTO information.
bradc
06-05-2010, 09:18 PM
Or post it up on a site like mivec.co.nz or the ftooc
VR4WGN
07-05-2010, 02:47 AM
Thanx Pierre i apreciate the help man..
um where do i ask for a purchased copy or a copy of this guide?
~Q~
jinglis
07-05-2010, 08:22 PM
the only things on the bulkhead are the fuel filter and brake distribution block
apart from the obvious like clutch and brake cylnders and wiper motor
pbaron
07-05-2010, 08:42 PM
Post 9 has a link to another forum that is hosting the files, there are a number of steps to go through to get the app installed and working but it is straight forward.
http://www.clubvr4.com/forum/showthread.php?t=34749&highlight=caps
VR4WGN
08-05-2010, 07:06 PM
thanx pierre
jinglis i think you are wrong sorry,even though i dont own 1 im sure i have found a few pics containing a vaccum solonoid on the firewall behind the plenium,otherwise where does the little 8mm vaccm hose go to? thin air??.... doubt it
jinglis
11-05-2010, 10:00 AM
i'll get some pics for you later today, been bsy drinking as rugby season has just finished.
have you managed to get a throttle body with tcl on it? anyway i'll get some pcs for you
as promised some pics, and yes i apologise i was wrong.
there are vaccum hoses going to:
the brake servo big one at the back
fuel pressure reg small one at the front
charcol canister from ontop of the throttle body
map sensor/ a sensor small one at the back
sensor
http://i278.photobucket.com/albums/kk94/jinglis_1986/DSC_0001-4.jpg
http://i278.photobucket.com/albums/kk94/jinglis_1986/DSC_0002-5.jpg
fuel pressure reg and charcol vaccum lines
http://i278.photobucket.com/albums/kk94/jinglis_1986/DSC_0004-6.jpg
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.