Can someone check out my Evoscan log?

[wintertidenz]

Not sure exactly what I'm meant to be looking for in the Evoscan log :P I did a run down the road yesterday, mainly normal driving with a few 3rd gear foot to the floor spurts.

Can someone check out the log and see if there is anything not quite right? Thought it looked OK when I checked it, but want to be sure.

Thanks!

[Nutter_John]

Knock sum is missing

[wintertidenz]

Hmm don't know what happened there, here's another copy of the file.

[Nick Mann]

Looks relatively healthy. Your car wasn't preoperly warm at the start of the log - the water temp is still rising and your o2 sensor hasn't warmed up. Knock is almost non-existant, looks healthy from that point of view. Air flow, timing, tps etc all seem to be showing values that look normal.

[wintertidenz]

Yeah the car had been running for a minute or two when I started Evoscan, I never thrash it till the water temp is normal on the gauge and oil is at least 70 degrees. Oil usually gets to 90 - 95 if I give it a hard run.

Thanks Nick - if it's looking healthy then there might not be a reason to remove the pod currently on the MAF...

[Nutter_John]

But you hve no view on AFR's so it could be running as lean as a lean thing , or as rich as a rich thing and evoscan would not tell you

[Nick Mann]

What John said.

Without AFR's it's impossible to say how the pod filter is running.

[mxc357]

I am also wondering if someone can help me read and understand my logs. I have a 97 Legnum in the US. I recently had the timing belt, water pump and seals replaced. Here is a scan I did today. No WOT on this log. I will post another one tonight with WOT. Thanks in advance for all your help. https://drive.google.com/file/d/1V64Z6wM62kVGqDng53JBhvFbOYZGRawg/view?usp=sharing

Here is the log with WOT.
https://drive.google.com/file/d/1z377YJ5uo73oT3kRgK_FYWaEhzZ0hPfy/view?usp=sharing