View Full Version : TCL problem
tassospap
17-08-2004, 08:36 AM
TCL problem.
ECU error code 71 : vacuum valve solenoid.
I 've been told that this is just a matter of cleaning the solenoid from dirt.
Anyone knows where the solenoid is situated? Any pics would be very
helpfull.
Thanks.
-LegnumVR4-
17-08-2004, 09:47 AM
If u are looking at ur car from straight on u will see the window wiper motor (black cylinder thing, same height as the chassis number on the right side near the black box with 2 ASC markings on it) to the left of that is a grey cylinder. On the same bracket that the grey cylinder is on there are 2 valve that are black, one above the other. They have a hose going into each one from one end and one plug from the other end.
Could try checking that the plugs are connected correctly, i found that was my problem i had. give the wires a bit of a wiggle to check if they are ok as well.
Rhys
tassospap
17-08-2004, 09:57 AM
Thanks. I will try that and let you know how it goes.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.