View Full Version : pls help front wheel bearing
robpower
27-05-2010, 12:01 PM
pls help me out i need a new front wheel bearing for my legnum vr4, would a british v6 gallant one fit, i can get this one for £89 and the legnum one is £260 from a main dealer they both come as a whole hub with studs etc, or on ebay there is one with just a bearing
any advise would greatly be appreciated thanks
MPBVr4
27-05-2010, 12:04 PM
V6 only has 4 studs. Try CAMSKILL good quality and just under £200.
edit/: seem to have gone down in price ?
http://www.camskill.co.uk/products.php?plid=m22b0s1401p6978
OH and welcome to the club:thumbsup:
robpower
27-05-2010, 12:08 PM
thanks very much for the quick reply
I think I have some 2nd hand ones from my car. Still attached to the hubs and ABS sensors. Let me know if you are interested.
robpower
27-05-2010, 12:21 PM
i need them asap and just ordered one from the above site, thanks anyway read this after :)
Davezj
27-05-2010, 01:43 PM
for future reference,
i would have gone down the ebay eclipse hub route and paid the postage, and gambled the 10% Duty and 17.5% VAT (£84 including duty and Vat)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230404607246&viewitem=&sspagename=STRK%3AMEWAX%3AIT
but you are in a hurry so i supose it is woorth paying the extra money from camskill which will probably be next day.
lancerevo3
27-05-2010, 07:03 PM
for future reference,
i would have gone down the ebay eclipse hub route and paid the postage, and gambled the 10% Duty and 17.5% VAT (£84 including duty and Vat)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230404607246&viewitem=&sspagename=STRK%3AMEWAX%3AIT
but you are in a hurry so i supose it is woorth paying the extra money from camskill which will probably be next day.
will these definately fit? as i need to get one ,but have a month to play with
Nick Mann
27-05-2010, 10:29 PM
http://www.clubvr4.com/forum/showthread.php?t=29759
Davezj
27-05-2010, 10:36 PM
The US doller exchange rate was much better when nick bought these hubs, but the US doller cost is about the same as it is now, if not a bit cheaper now, but with the strength of the pound at the moment for a pair of hubs you will be looking at about £170 if you take into account the duty and VAT which should be paid on import.
lancerevo3
28-05-2010, 12:29 PM
working out 78euro so ill have a gamble on it
thanks
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.