boost selenoid hose location

[VR4Kaos]

hi just wondering were thie hose to this nipple goes to ?
35888

[ianturbo]

Under the air box ,the big pipe(i think goes to the turbos ) should have a nipple stickin out the top , it goes on to there , its hard work tryin to describe it without pointin at stuff !!/lol
ian
right underneath the elbow ,with the red tipped pipe on ,

[VR4Kaos]

i think i know wher you mean mate but think the front nipple goe's there tbh

[ianturbo]

ill go have a look , :o
ian

[ianturbo]

front one goes into a "T" that goes down side of engine and to the red tipped pipeon the elbow ,the one you have circled goes to were i said , well it does on mine , /juggle
ian

[VR4Kaos]

soh ok o where does the one i aint circled go to ?

[ianturbo]

it goes to the front of engine then into a T piece one side goes to the elbow ,(red tipped pipe) the other end goes down the side towards the front ,i can,t see were to though ,
ian

[VR4Kaos]

now im totaly confused lol dose it go into a tee peice to the fuel reg?

[apeman69]

The top nipple goes to the air filter inlet piping, the big fat pipe that leads into the air filter area. Follow the piping down from the MAF/air filter until you find the thin vacuum hose connected to the big fat pipe, similar to the two connections on the inlet elbow that you are very familiar with.
The bottom nipple on the boost solenoid is connected to the wastegate actuators and the red-tipped pipe on the inlet elbow. Here is a diagram. Boost connections are in red.
Sorry if this doesn't make sense but I've just got back from a wedding and I'm a bit worse for ware! It makes sense to me.:runkest: :runkest: :runkest:

[VR4Kaos]

thankyou very much ive found location and connected up hoses but still stalling ffs startin a new thread on it now aaarrrggg

[VR4Kaos]

dose anyone know what would happen if the hose was wrong way round

[Wodjno]

How do u mean the wrong way round ?
FPR on Boost n Vice Versa ?

[VR4Kaos]

i mean the hose from the seleniod to the tee and the hose from selenoid to the big pipe with nipple sticking out

[VR4Kaos]

The top nipple goes to the air filter inlet piping, the big fat pipe that leads into the air filter area. Follow the piping down from the MAF/air filter until you find the thin vacuum hose connected to the big fat pipe, similar to the two connections on the inlet elbow that you are very familiar with.
The bottom nipple on the boost solenoid is connected to the wastegate actuators and the red-tipped pipe on the inlet elbow. Here is a diagram. Boost connections are in red.
Sorry if this doesn't make sense but I've just got back from a wedding and I'm a bit worse for ware! It makes sense to me.:runkest: :runkest: :runkest:
man thankyou very much indeed just looked at this pic on my iphone and it is as clrear as a bell where the hoses go and guess what i had em wrong and the answer to my last question bout what would happen if they was wrong the answer it will drive like a ford escort put em rigjht now and vwalla i got me a vr4 back /Banana :runkest: by the way rep on its way for you to post this after returning from a wedding half cut lol :sweethear