Rear ABS sensor's plug

[Ralliart1]

Where is?Just I've drop the rear hub carier and would like to disconect the ABS sensor from his plug.I have followed the cable up to the hole in the chassie.From there don't know.
Few years ago I had same issue,but then just cut the wires,fit the spare hub carier and soldering the wires,job done,works perfect.
Now I would like to do it more human and disconect from his plug.
But where is the bloody conector?/Hissy

[Xenon]

The connector is just about an inch or two away (towards the centre of the subframe) from the hole. It's almost impossible to reach over there with your hands. And if you manage to get there, you'll have to press a latch on the connector to disconnect. Masterpiece of engineering... :lol:

[Nick Mann]

It is possible to get your fingers in far enough, but not easy! Good luck...

[Ralliart1]

Thanks for advices,I think the "barbar"method(cut the wire)will be the solution again.