PDA

View Full Version : difference in rear shafts


taupodrifta
20-07-2010, 02:12 AM
What is the difference between AYC and non-AYC half shafts???
scott.mohekey
20-07-2010, 02:18 AM
Length.
bradc
20-07-2010, 06:45 AM
And they are incompatible between each other of course.
Gowf
21-07-2010, 12:06 AM
Only due to the length of the shaft itself though, the joints are the same. The Evo shafts are all different lengths also so its not just as easy as picking one of them up. Although i was running E7 RS shafts with the e7 diff even though the track is slightly wider and the shafts longer they worked fine.
Kenneth
23-07-2010, 10:58 PM
The non-ayc rear diff requires two male half shaft ends (inner ends of course), where AYC has one male and one female.
VR4WGN
25-07-2010, 12:03 AM
Kenneth is bang on there!!!
Mr.Salas
27-07-2010, 05:01 AM
Dudes, what are lengths of the evo shafts?
Mr.Salas
27-07-2010, 05:40 AM
the RS model differential shafts
Gowf
27-07-2010, 02:46 PM
I have them somewhere in the mountain of paperwork on my desk.... when i find them il give you a shout
Mr.Salas
27-07-2010, 06:02 PM
Okies meng thanks...
Mr.Salas
28-07-2010, 01:26 AM
Btw are the axles cup or whats it called the same diameter and have the same amount of splines on all the evo 7/8/9 differentials?
Mr.Salas
12-08-2010, 05:13 AM
what do you guys think about using a non turbo 4wd legnum/galant differential setup with some sort of lsd in it?
Kenneth
12-08-2010, 10:07 AM
Thats exactly what I have done.
Mr.Salas
12-08-2010, 07:12 PM
Yeps I know hehe.
Still researching things!!!

Still wondering if the non turbo 4wd legnum/galant Axles will fit on e evo 8 diff
Mr.Salas
12-08-2010, 07:38 PM
Any one has a picture of a legnum/galant open diff or the non turbo 4wd diff
Mr.Salas
12-08-2010, 08:22 PM
Searching on forum found this picture from e member
http://img.photobucket.com/albums/v682/Pizzadelite/Galant%20Diff/df85f833.jpg

Now Kenneth is this the same diff you used? and Installed a evo 9 lsd unit in it?