Pillow ball track rod ends

[dan2k7]

Does anyone know any companies which manufacture uprated/pillow ball track rod ends?

[Nutter_John]

uprated in what sense ? and for what car

[dan2k7]

Using pillow balls, rose joints or spherical bearings pressed into the housing and for vr4 or evos if they use the same track rods

[GTOpete]

You could try looking here;

http://www.speedwaymotors.com/ProductSummary.aspx?free_text|9/29/2010%209:11:02%20AM=female+track+rod+end&deptId=0

Ive used the above place for making up adjustable camber arms & drop links and rear steer delete kits for the GTOs but unless its a track only car its not something i'd do with the track ends because they will get killed on a normal road car over here pretty quickly I would have thought. It wouldnt be long before you saw some play in them or they where rusted up and notchy, best thing to do would be to find some with the grease points on them, at least then you can keep on top of them and give them a bit of a chance!