PDA

View Full Version : Taking Apart Gear Selector...



Uray25
01-11-2010, 04:25 PM
Hey All,

Does anyone know how to disassemble the TipTronic Gear Selector ?
I bought a Chrome version for our Leggie to replace the Black one, but it's not centered as you can see in the picture and feels a bit "loose".
Also the Button on top of it goes rather heavy.

Any help greatly appreciated.

Regards,

Raymond

Nick Mann
01-11-2010, 04:47 PM
You need to prise the button up and out of the lever to expose the nut inside. Then you need a deep 10mm socket to tighten it all up again.

Mark 4
01-11-2010, 04:49 PM
Once you have done that you can remove the chrome part and swap it for your one. Probably easier than changing the whole assembly.

Uray25
01-11-2010, 05:54 PM
Thank you all, will try tommorow...

Swapping the Handle and Chrome Part then, the previous owner damaged the whole thing.
And will install the Carbon set as well when i'm working on the car anyway...