c0xxy
04-03-2011, 03:19 PM
just been pulling the screens out of my seats and thought id take pics as i went!
it is pretty simple but the manual would be alot more helpful with proper pictures!
first off you need to push a screw driver in horizontaly and push these white clips into the seat so they detach from the back.
42806
they are about 2 inches in from the bottom corners.
42808
once they are free its just a simple left right wiggle to free the side clips,
42809
and then push in as you pull down to free top off.
42807
another pic to show where all clips are
42805
refit is simply by refitting the white clips to the seat back and then placing back against the seat, push the top up and in, then put pressure onto the bottom to attach remaining clips.
hope this is of use to someone
it is pretty simple but the manual would be alot more helpful with proper pictures!
first off you need to push a screw driver in horizontaly and push these white clips into the seat so they detach from the back.
42806
they are about 2 inches in from the bottom corners.
42808
once they are free its just a simple left right wiggle to free the side clips,
42809
and then push in as you pull down to free top off.
42807
another pic to show where all clips are
42805
refit is simply by refitting the white clips to the seat back and then placing back against the seat, push the top up and in, then put pressure onto the bottom to attach remaining clips.
hope this is of use to someone