PDA

View Full Version : High vis dash, clocks, instrument clester



Davezj
28-04-2011, 10:58 PM
Here is a little bit of info i did not know, but seems obvious now.

see pic below

44230

you can see that the holes on the back of the dash that need short screws are marked with a little copper tag on the holes copper pad the longer screws do not have the little copper tag on the holes copper pad.
if you put the wrong screw in the wrong hole it can cause a number of problems one of which is the fuel gauge or water temp gauge will not light up.

Davezj
29-04-2011, 11:05 PM
if anyone wants to shout up and say, that's not right, or bugger me i didn't know that then that that would be good. 1

ROY ORBERSON IS TV AT MOMENT AND HE IS UNBELIEVABLE, i can't tell you wonderfully he is, but what you have to remember is this is all live and is note perfect, he is playing to 300 people tops and they all know his songs.
BBC 22:25 to 23:30

you are privileged to watch this performance!

Nick Mann
29-04-2011, 11:41 PM
Dave, have you had a can of pop this evening? :D

Davezj
29-04-2011, 11:51 PM
the odd one or two,


three




four



seven







five




ten




eight
















time for bed!
you are still privileged!

bradc
30-04-2011, 12:00 AM
I put up a pic years ago in my 260kmh speedo article colour coding the short and long ones ;)