PDA

View Full Version : VR4 Gearbox removal on siezed motor



wazz_up88
27-07-2011, 10:35 AM
Hey guys im new here and have been having a look around to see if people have had any similair problems.

The car is a legnum vr4 with a seized motor and its auto. Iv droped the whole motor out so iv got it on the ground now.

As the usual im having the issue with the transfer box removal but will try the bolt trick in the morning.

My main issue is that the motor is siezed so i cant turn it round to undo the torque converter bolts. Should I be able to pull the box off and the TC stay with the motor?

Your help is much appretiated.

Adam.Findlay
27-07-2011, 10:48 AM
yeah once transfer case is off and gearbox boolts are out the box will slide out of the TC and the TC will stay with the motor, good luck getting the shaft out.

Nick Mann
27-07-2011, 01:43 PM
Adam is spot on. Good luck!