View Full Version : EVO owner help please
The Vee
07-10-2011, 08:51 PM
Probably aimed at Pete and Wayne as I know their cars but any shouts welcome.
I wonder if anyone could do me a favour please and take a measurement for me.
I need to know the distance between the top bolt of the upper door hinge where it screws into the A post to the top bolt of the lower hinge also where it screws into the A post. Centre to centre of the bolt heads is fine. Obviously either front door will do.
Thanks................:)
lancerevo3
07-10-2011, 08:54 PM
evo 3 here if its any help ,evo 4 is at work
The Vee
07-10-2011, 08:58 PM
Mark, thanks for the response, both the 3 and 4 would be useful. I think the 4 maybe the same as 6 but not sure. Don't bust a gut though, it's another one of my armchair projects!!
lancerevo3
07-10-2011, 09:12 PM
4,5,6 are the same 3 is a different shell.
will be the morning before i can check the 4 for you
The Vee
07-10-2011, 09:49 PM
That's fine thanks
lancerevo3
08-10-2011, 01:38 PM
320mm centre to centre
The Vee
08-10-2011, 03:37 PM
Thank you Mark, much appreciated. Can I just confirm that is the E4 or both? If it's the 4 no need to worry on the 3 cheers Andy
lancerevo3
08-10-2011, 03:41 PM
Ya thats the evo 4 andy
The Vee
08-10-2011, 03:43 PM
Nice one mate :)
Mark 4
09-10-2011, 08:51 AM
What are you plotting Andy ?
The Vee
09-10-2011, 03:27 PM
Have long thought the G is a little sloppy at the front. Was looking at Bracing and came across fender braces for EVOs. Hmmmmmmmm me thinks just the sort of thing I was thinkinking of fabricating, but these EVO ones may fit with pehaps a little adjustment.
lancerevo3
09-10-2011, 03:50 PM
are those called j bars ?
The Vee
09-10-2011, 03:57 PM
More commonly known as Flitch Braces over here. Fender bracing or even Under Fender Bracing tends to be the US term. Have even seem them called A pillar braces.
Mark 4
09-10-2011, 07:57 PM
Sounds interesting Andy, look forward to hearing more...
Spirit
09-10-2011, 08:48 PM
335mm on mine mate, that's top bolt to top bolt on the door itself.
The Vee
09-10-2011, 10:29 PM
OK cheers Pete. Mark yeah they'll get done but you know how rapid my progress is. Watch this space................................
Have long thought the G is a little sloppy at the front. Was looking at Bracing and came across fender braces for EVOs. Hmmmmmmmm me thinks just the sort of thing I was thinkinking of fabricating, but these EVO ones may fit with pehaps a little adjustment.Any links to this Andy to see what it looks like?
White Lightning
10-10-2011, 08:28 PM
Just seen this, Andy. Do you want me to check mine too?
The Vee
10-10-2011, 10:13 PM
Cheers Wayne, but I think it should be the same as the E4 quoted earlier. Mind you - I'm guessing a little that the Tommie was based on the E6?
White Lightning
10-10-2011, 10:18 PM
Mind you - I'm guessing a little that the Tommie was based on the E6?
Aye, indeed it was mate. My avatar proves this :D
The Vee
10-10-2011, 10:18 PM
This is the sort of thing Andy (aboo)
http://www.ultraracing.com.my/vgreenwap/image/model/Nissan/Nissan%20R32%20fender.jpg
The Vee
10-10-2011, 10:22 PM
Aye, indeed it was mate. My avatar proves this :D
Might have been an early 7 /pan :d
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.