Nick Mann
25-10-2011, 10:48 AM
I sold my HKS FCD a good while ago, but can't remember who to. Whilst clearing the garage I have found my post it note wiring diagram, so thought I would post it up for all to see:
The wires on the FCD that were connected:
Red = 12v
Black = ground
White = MAF signal, MAF
Yellow = MAF signal, ECU
Green = ? Connected to IFS.
Using this diagram, kindly created by foxdie:
http://www.clubvr4.com/forum/attachment.php?attachmentid=47530&d=1313157046
The wires are connected to:
Red = A25
Black = A26
Green = C8
White = D20 (The wire to D20 needs chopping, connect this one to the loom/maf side of the wire.)
Yellow = D20 (The wire to D20 needs chopping, connect this one to the ECU side.)
Hope that this helps at least one person! :D
The wires on the FCD that were connected:
Red = 12v
Black = ground
White = MAF signal, MAF
Yellow = MAF signal, ECU
Green = ? Connected to IFS.
Using this diagram, kindly created by foxdie:
http://www.clubvr4.com/forum/attachment.php?attachmentid=47530&d=1313157046
The wires are connected to:
Red = A25
Black = A26
Green = C8
White = D20 (The wire to D20 needs chopping, connect this one to the loom/maf side of the wire.)
Yellow = D20 (The wire to D20 needs chopping, connect this one to the ECU side.)
Hope that this helps at least one person! :D