HKS FCD Wiring

[Nick Mann]

I sold my HKS FCD a good while ago, but can't remember who to. Whilst clearing the garage I have found my post it note wiring diagram, so thought I would post it up for all to see:

The wires on the FCD that were connected:

Red = 12v
Black = ground
White = MAF signal, MAF
Yellow = MAF signal, ECU
Green = ? Connected to IFS.

Using this diagram, kindly created by foxdie:
http://www.clubvr4.com/forum/attachment.php?attachmentid=47530&d=1313157046
The wires are connected to:
Red = A25
Black = A26
Green = C8
White = D20 (The wire to D20 needs chopping, connect this one to the loom/maf side of the wire.)
Yellow = D20 (The wire to D20 needs chopping, connect this one to the ECU side.)

Hope that this helps at least one person! :D

[Kryton]

It was me. Still not got round to doing anything with it but thanks as I'm sure this will come in useful in the cost winter evenings. Don't suppose you found the wiring info for the Dastek (which I have also done nothing with /haz)?

[Nick Mann]

Nope bud. It's looking unlikely now as I haven't got much left to sort in the garage. If I find it I will be sure to let you know!