View Full Version : replacing rear wiper arm on galant with this maybe
funkstardelux
15-12-2011, 11:44 PM
http://www.ebay.co.uk/itm/Mitsubishi-Lancer-2004-Upgrade-rear-wiper-arm-blade-/390373709381?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5ae4161645
Davezj
15-12-2011, 11:54 PM
i think there is a thread on replacing the rear wiper arm with one of these smooth sleek numbers, but i can't remeber which can it came from. i thick it was from a VW.
but i don't see why if the motor spindles would be a different size on a lancer compared with the vr4.
peter thomson
16-12-2011, 09:25 AM
The Lancer spindle is a different size. tried this last year
Nick Mann
16-12-2011, 10:42 AM
I've got one on my Legnum that looks like that, but it came on the car so I have no idea where it came from.
crazydriver81
16-12-2011, 10:59 AM
Dave, look here: http://www.clubvr4.com/forum/showthread.php?60014-body-kit-ID&highlight=wiper+arm (post #11 & 13).
This is a direct fit, but it'll cost some quid if you choose OE parts (was 70 EUR all inc.)
funkstardelux
16-12-2011, 11:26 AM
thanks stefan , is it for a legnum/estate as mine a saloon?
crazydriver81
16-12-2011, 11:43 AM
thanks stefan , is it for a legnum/estate as mine a saloon?
As you have a saloon, you will have the washer nozzle below the wiper arm, correct? Then this will not work as there is not enough space below the Outlander wiper arm + you have to care about the height as the boot lid has to pass the plastic arm!
A friend of mine has done that mod to his 6G Galant and AFAIk he has used a rear wiper arm from a Honda Fit / Jazz as this one has enough space for the washer nozzle. I'll call him this evening and ask for you. ;)
funkstardelux
16-12-2011, 12:53 PM
cool thanks stefan :)
crazydriver81
17-12-2011, 01:30 PM
Hi Dave! If you want to change the rear wiper on your saloon, then you can take a wiper arm from a Honda Stream. It'll fit the wiper motor from your saloon.
In Germany, the whole wiper assembly inc blade cost around 40 eur.
Stefan
funkstardelux
17-12-2011, 02:35 PM
thanks stefan, is it the normal hook type your friend has or the aero wiper arm?
crazydriver81
17-12-2011, 05:38 PM
Aero wiper arm
funkstardelux
18-12-2011, 10:57 PM
cool :)
crazydriver81
19-12-2011, 09:40 AM
Here's a picture of the wiper: http://upload.wikimedia.org/wikipedia/commons/3/30/Honda_Stream_titan_hr.jpg
funkstardelux
19-12-2011, 01:47 PM
nice..liking it :)
crazydriver81
20-12-2011, 10:46 AM
just to be complete here... :)
Part# for the Honda OE rear wiper arm assembly is: 76740-S7A-003 (Honda Stream / MY 2001)
funkstardelux
20-12-2011, 02:26 PM
thanks stefan :)
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.