The matter with Vr2

[Maxskaos_vr6]

i just finish my instaling 6a13tt manual to my vr2 with the exhaust is uncomplete,just weld it 3' with mid pipe,with no any gauge meter
(it already with water temp sensor+wiring,oil temp with sensor+wiring and not found the wiring for boost) and no tuning.
when i test it at gear 2nd it cough..2 month i test it like above condition and i think my old 2.0 gdi engine can beat it and that why it just like that
in 2 month..and i try to find what its probs...i need some advice and guide from clubvr4 members who know a lot about 6a13tt.

Thanks

[Nick Mann]

Sorry, I don't really understand your problem. It sounds like you have an unfinished project that doesn't run? I'm not sure how you want us to help?

[The Vee]

You say no boost wiring? Have you actually used a VR4 engine loom and ecu?

[Maxskaos_vr6]

Mr.andrew,'boost wiring' that i mean the wiring for boost meter that i not instal yet..

[GalantOnly]

Mr.andrew,'boost wiring' that i mean the wiring for boost meter that i not instal yet..

:uhoh:

[Maxskaos_vr6]

The real problem is the performance of my 6A13TT is not what i hope it be...this project still not finished because after i completely change the engine and i test it,the performance of my from 1st gear to 5th gear is like i drive the n/a car..the diffrent of n/a n my car just because it has blow off...then i think this because of my gearbox is 4wd modifield to 2wd..

My car just not finished with complete exhaust system n dyno...

i dont know the real performance of standart legnum/vr4 with 6a13tt...i don't know it because of my engine or just that's 6a13tt can perform.

[GalantOnly]

How about install the boost meter and see, if is there any boost at all in the first place?

[scott.mohekey]

Do you have the o2 sensor plumbed in to the exhaust?

[ex-derv]

if it's performing like a 2 litre then it's definitely not right - it should be shockingly quick compared to that

[Maxskaos_vr6]

i will install the boost meter,and put the meter for the already wiring & sensor at my engine...after that?the already sensor at the engine is for water temp n oil temp