BCX
26-04-2012, 03:21 PM
WARNING & DISCLAIMER:
NOT FOR ROAD USE
I accept no responsibility for any damage or costs, not limited to blown engine, bricked ECU, mechanical failure, poor reliability, injury/death, fines/defects, void insurance and repair costs. This ROM and Configurator Program is provided as-is and I accept NO responsibility for the use of these. By choosing to download and use either of these items, you agree to accept all responsibly that may arise from their use.
Now that's out of the way, I present BCXMODs V1.0 Beta
This version of the mod will allow for two independently controlled conditional outputs. Features of Conditional Outputs include user configurable criteria (either 1 or 2 conditions) and ability to control condition (either Less Than or Greater Than). I've created a configurator program which should hopefully be straight forward - and a lot more user friendlier than trying to use ECUFlash. You will still need ECUFlash to upload this rom. It's worth noting when using 2 conditions - the outputs must meet both conditions (i.e. condition 1 = true AND condition 2 = true)
Available versions are only limited to EM2004 (0013 code) at the moment - if you have a different ECU (i.e. EM2005, EM2381, EM2428), I’ll be releasing ROMs for those cars that way you can keep the correct configuration. Both this ROM and Configurator Program are Beta - If you come across any problems, please let me know and I’ll update it. Be sure to check back in this thread for newer versions. Configurator program is written in C# so will need .Net Framework 4.0 as a prerequisite.
Output Pins are B-1 & B-2. These outputs will earth when 'on' (conditions met) and should be able to sink enough current to drive a relay (I was using a parker bulb no worries - approx. 100ma)
Uses are endless for this MOD, some that come to mind:
Shift Lamp (Output: globe/led, Condition: Over certain RPM)
Intercooler Spray (Output: relay that drive pump, Condition: Over certain TPS and/or Load)
Water Injection (Output: relay that drive pump, Condition: Over certain TPS and/or Load)
Secondary Knocksum indicator (Output: globe/led, Condition: Over certain knocksum)
Economy Driving light (Output: globe/led, Condition: below certain TPS and/or load)
????
Profit!!!
Future versions will hopefully include more outputs, timed outputs (ie, leave on for 500ms once criteria met, then off), latching outputs (turn on with a condition, turn off with another condition). Also, if i've missed an Item to use in a condition (ie tps, coolant, etc) let me know, and i'll add it.
Enjoy, and as always, happy for criticisms/comments. Donations accepted if you like it/use it... this has taken some time to create!
Thanks,
Bill.
PS. This will eventually be merged with KSMods. For now, this will be a separate MOD. Stay Tuned! (no pun intended :p)
Linky to BCXMOD V1.0Beta (http://dl.dropbox.com/u/9305786/Defs/BCXMOD%20v1.0%20Beta.zip/)
NOT FOR ROAD USE
I accept no responsibility for any damage or costs, not limited to blown engine, bricked ECU, mechanical failure, poor reliability, injury/death, fines/defects, void insurance and repair costs. This ROM and Configurator Program is provided as-is and I accept NO responsibility for the use of these. By choosing to download and use either of these items, you agree to accept all responsibly that may arise from their use.
Now that's out of the way, I present BCXMODs V1.0 Beta
This version of the mod will allow for two independently controlled conditional outputs. Features of Conditional Outputs include user configurable criteria (either 1 or 2 conditions) and ability to control condition (either Less Than or Greater Than). I've created a configurator program which should hopefully be straight forward - and a lot more user friendlier than trying to use ECUFlash. You will still need ECUFlash to upload this rom. It's worth noting when using 2 conditions - the outputs must meet both conditions (i.e. condition 1 = true AND condition 2 = true)
Available versions are only limited to EM2004 (0013 code) at the moment - if you have a different ECU (i.e. EM2005, EM2381, EM2428), I’ll be releasing ROMs for those cars that way you can keep the correct configuration. Both this ROM and Configurator Program are Beta - If you come across any problems, please let me know and I’ll update it. Be sure to check back in this thread for newer versions. Configurator program is written in C# so will need .Net Framework 4.0 as a prerequisite.
Output Pins are B-1 & B-2. These outputs will earth when 'on' (conditions met) and should be able to sink enough current to drive a relay (I was using a parker bulb no worries - approx. 100ma)
Uses are endless for this MOD, some that come to mind:
Shift Lamp (Output: globe/led, Condition: Over certain RPM)
Intercooler Spray (Output: relay that drive pump, Condition: Over certain TPS and/or Load)
Water Injection (Output: relay that drive pump, Condition: Over certain TPS and/or Load)
Secondary Knocksum indicator (Output: globe/led, Condition: Over certain knocksum)
Economy Driving light (Output: globe/led, Condition: below certain TPS and/or load)
????
Profit!!!
Future versions will hopefully include more outputs, timed outputs (ie, leave on for 500ms once criteria met, then off), latching outputs (turn on with a condition, turn off with another condition). Also, if i've missed an Item to use in a condition (ie tps, coolant, etc) let me know, and i'll add it.
Enjoy, and as always, happy for criticisms/comments. Donations accepted if you like it/use it... this has taken some time to create!
Thanks,
Bill.
PS. This will eventually be merged with KSMods. For now, this will be a separate MOD. Stay Tuned! (no pun intended :p)
Linky to BCXMOD V1.0Beta (http://dl.dropbox.com/u/9305786/Defs/BCXMOD%20v1.0%20Beta.zip/)