Reconstructor
15-05-2012, 12:58 PM
Any way to tell TCU what gear to engage? First I planned to use up & down pins on manual mode, and was quite convinced that the method to go on desired gear is to cycle thru all gears on the way.
However, recently I noticed that if you kick the pedal and under hard acceleration, the box can go from 5th directly to second. So now I can't sleep thinking about how can outside world tell the TCU what gear to engage. :rolleyes4
However, recently I noticed that if you kick the pedal and under hard acceleration, the box can go from 5th directly to second. So now I can't sleep thinking about how can outside world tell the TCU what gear to engage. :rolleyes4