After a particular ROM...

[BCX]

Hey all...

I'm chasing after a ROM from a SOHC 6a13 2.5l. Anyone have something lying around?

I need this rom to check something in relation to disassembly. I'm hoping the donor car/motor/ecu uses a distributor rather than coils packs.

Thanks,
Bill

[foxdie]

Hi Bill, I have both versions of the Rom, will put them on drop box for you today when I get to work :)

[scott.mohekey]

I've got an ECU out of a SOHC 2.5 v6 that was mated to an auto, and it has TWO 7201 chips in it (one controlling the engine, one the auto). So I'm not sure all of these will have the same sort of rom.

[Galant_martin]

Sry i just realised that u already have my ROM :D

greetings

[BCX]

thanks guys...

Jason - sounds good.

Scott - preferably after 7202/7203 rom

Martin - i'll get you those defs hopefully some time tonight when i get home...

I'm actually using these roms for another project - Magna guys here in Aus use a 6g72 without knock sensor, so i'm hoping to add the ability. i'm actually trying to find a ROM to use as a donor... diamante is out of the question cos it has 4 o2 sensors. Stock magna uses one o2 Sensor, has no knock sensor, and distributor (not coil packs)

I know this isn't VR4 related... but i'll create defs as i'll need to mod it for magna use (ie copy fuel maps and other parameters)

[foxdie]

Here you go Bill;

Default V6 7202 Auto (161HP).hex (https://www.dropbox.com/s/5dv40ss30uxn1ze/Default%20V6%207202%20Auto%20%28161HP%29.hex)
Default V6 7203 Auto (158HP).hex (https://www.dropbox.com/s/1g8qnl7jwpatp1c/Default%20V6%207203%20Auto%20%28158HP%29.hex)

[blodeaxe]

since I am also looking for a ROM

do you guys have a ROM and or xml for a GDI-Turbo Cedia Lancer?

[lateshow]

Gdi:s are a bit tricky, id love to get mi hands on a 2.4 Gdi Galant ROM......... But that one would require a mmcflasher...

[Wodjno]

I've a good idea where there's a 1.8gdi ECU from a Legnum Viento :) if that's close enough ?

Sent from my HTC Wildfire using Tapatalk 2

[foxdie]

Gdi:s are a bit tricky, id love to get mi hands on a 2.4 Gdi Galant ROM......... But that one would require a mmcflasher...

Well I've got that, anyone in the UK (preferably near Birmingham or going to JapFest 2) got a 2.4 GDI I can abuse for 5 mins to pull the ROM? :)

[lateshow]

That would be nice.... id love to see whats happening there. Specially the lean part. I already now that target afr:s are about 25:1-30:1 when in lean mode :) My friends gdi however seems to go leaner on bigger loads than mine....

[blodeaxe]

Found a GDI 2.4 ROM for a 4G64
http://forums.openecu.org/viewtopic.php?f=55&t=5468&sid=844a30cd54b96b63d10187cc2fc5fd60

and a V6 MIVEC FTO GPX Plastic case ECU 7202 which is the 200HP Version

http://ozvr4.com/forums/showthread.p...536#post255536

Included Definitions are in-complete

GDI 4G93 Manual ROM and Definition File for this file remove .pdf its a zip file
http://ozvr4.com/forums/attachment.p...2&d=1332123675

6A12 MIVEC 200HP Manual Definition File
http://ozvr4.com/forums/attachment.p...3&d=1332123679

MIVEC ROM
http://ozvr4.com/forums/attachment.p...4&d=1332123680

[lateshow]

Ok thanks ! Id love to see differences between gdi models, we have the european model which doesnt go as lean as the japanese model, however nowadays we get better gasoline than we used to.. so i thought we could give her a try to go a bit leaner

[blodeaxe]

Hey guys anything for me?

What about your XML files for n/a GDI?