mossys

[mossy]

1

[mossy]

2

[mossy]

3

[mossy]

4

[haydar]

Very nice.

Your front bumper though seems to be pushed in under the number plate? Or is this just an optical illusion?


Also, I see in your signiture you've got 'Big Bore', what do you mean by this?

[mossy]

front has had a tickle up unfortunately, looks better now but still not right
some of our kerbs here in nz are higher than others and are a bit of a trap
big bore as in 70mm dia pipe.... 2 3/4 inch i think that is

[haydar]

I see.

Is your car on the original springs or has it been lowered?

[mossy]

it is lower than a lot of others around town though not sure why as it was like it when i bought it......the 17's and low profiles also add to this i think when you look at it beside a standard one

[mossy]

saw a standard vr4 today and did some measuring for you
front: ground to top of guard on mine = 670mm
on other one = 720mm

back: ground to top of guard on mine = 670mm
on other one = 710mm

so would appear to be 40-50mm lower which is probably why my front bib gets such a hiding on the kerbs!

[Spirit]

Check the springs mate - mine has HKS springs and did not notice them until a few months back when compared it to other VR4's - my front skirt takes quite a hammering too :Cry1:

[SGHOM]

I've just taken lots of nice piccies of my legnum, but I ai'nt got a digital camera, just 35mm. so , when I get them developed, I'll scan them & try to post them on here, BUT ....... me & computers dont get on at all !!! you might end up getting them through your letter box. :confused:

[Spirit]

At least it will be better than 90% of the current crap I get through my letterbox mate :D