Speedo and rev counter not working

[LegnumRqm]

Recently bought a run down legnum and in the process of restoring her to her former glory. The car had a starting issue when i first bought it but that was down to a aftermarket clifford alarm system being fitted, after ripping all that out we got her fired up and shes running sweet as a nut. Only issue being that there is nothing shown on the dash??? Indicators, lights, gear indicator light etc. all working but no speedo or rev counter?
Can anyone help me out?

[Gly]

IFS http://www.clubvr4.com/forum/showthread.php?42769-Rev-counter-doesn-t-work&highlight=ifs

the speedo may or may not work again with a replacement ifs,

that could be a speedo sensor or kph/mph converter issue??

[Nick Mann]

Is the back light coming on?

[LegnumRqm]

No the back light doesnt come on, its like lookin into the abyss tryin to see the dials haha

[Nick Mann]

One of the fuses behind the coin holder. 10 amp ftom memory? About in the middle of the row, but I can't remember if it is the top row or the bottom.

[LegnumRqm]

I checked all my fuses the other day and there all fine? Ill check again on tuesday. Would there be anything else u can think of other than the fuses?

[wintertidenz]

Check that the dash connections at the rear of the cluster are in correctly. Maybe just give it a wiggle and make sure it's seated.

[MarkSanne]

I think it's the mini 10 amp fuse in the engine bay fusebox you'll need to look into.

[Nick Mann]

I think it's the mini 10 amp fuse in the engine bay fusebox you'll need to look into.
Yes, there is a fuse in there too. Marked side lights I think.

[LegnumRqm]

Still no luck with this, maybe need an ifs sensor if anyones got one? Can get new for around £30 but worth lookin for a bargain