PDA

View Full Version : Apexi SAFC - help



Scanny
17-02-2013, 08:16 PM
this is what i have/had
http://wctsmultiservizi.com/wp-content/uploads/2012/09/146.jpg

how important is it once fitted?

i changed my fascia today and as this object was an eyesore with the holes required to house that and the boost guage/turbo timer. i uplugged it from the back and put the fascia in and now the car is idling at 1100 when first started and it sounds really rough when revved. like its choking! nothing else has been done to the car and the bonnet wasnt even opened. is it likely to be this thing causing the problem? if i plug it back in all should be well again?

lancerevo3
17-02-2013, 08:32 PM
signal goes from maf to this and then to the ecu ,if it isnt plugged in it wont run right unless you reconnect your standard loom

Scanny
17-02-2013, 09:02 PM
thanks Mark. i thought it only interfered somehow. i didnt know the signal actually went through the thing. its back in now and running fine again which presumably means i didnt disturb any other wiring when i was poking around in there earlier