Clearing out garage of spares

[Oblivion]

So I'm having to move house again and theres a few spare parts I've been hanging onto that I dont really need. If no one wants any of these I'll probabaly dump them rather than continue to keep moving them around with me (apart from the king springs set).
PM me with a reasonable offer if interested in anything.
A lot of stuff is rather heavy so would prefer a pick up if possible, shipping might turn out costly for heavy parts.

Brakes:
Standard front calipers with Hawk pads
Standard rear calipers with pads
Standard front discs -gone
Standard rear discs
Slotted front discs
Evo 10 two piece front discs - these were causing vibration before I took changed to aftermarket rotors, would need a skim if salvageable, free to anyone that can pick them up. -gone

Transmission:
Clutch cover and standard flywheel - no clutch disc in the middle -gone

Suspension:
King 'Superlow' springs for front and rear, with KYB shocks all around
Standard front springs - gone
Standard rear springs - gone
Standard front sway bar - gone
Standard rear sway bar - gone

Misc:
Tyre x1 - Falken FK452 225/35 R19 - $1 reserve on Trademe - gone

Will update where needed.

[Oblivion]

Also have the standard front and rear speakers available.

[dixon8]

hi aaron has the slotted front disc got lots of life still

[Oblivion]

Hi, there should definitely be a fair bit of life in them, I only took them off because I changed to a brembo setup.

[dixon8]

Hi, there should definitely be a fair bit of life in them, I only took them off because I changed to a brembo setup.
how much are you wanting, maybe put aside for me and I will arrange pickup?

[Oblivion]

Yeah pick up should be fine if you let me know when. Hows $20 sound?

[DvsVr4]

how much would you be wanting for the king springs? could arrange pick up from my end

[Oblivion]

dixon8 I will probably be moving next weekend, any chance you can have them picked up before then?

DvsVr4 ummmm new set are around $400 just for the springs, for the springs and matching KYB shocks I think around $300 would be reasonable.

[DvsVr4]

Sounds good man,
Will have to consult the lovely fiance xD

will let you know in a couple of days

Josh
DvsVr4

[dixon8]

dixon8 I will probably be moving next weekend, any chance you can have them picked up before then?

sorry for not getting back to you earlier. didn't realise you need to dispose of items so soon.

cannot get them quickly as I'm in wgtn, so I will leave it,

thanks for the offer. :)

[DvsVr4]

Hey man do you still have the springs and shocks? were they are good ride and did it help handling at all?? i am very keen on these but dont have the finds atm as i am planning a wedding. would you hold on to them for me?

Josh

[Oblivion]

Yep I still have them. The shocks were matched to the springs so it does handle pretty well with these as well as bring the ride height down. I would say theyre a pretty good compromise without going to a full coilover setup. I could possibly hold them for a while, how long were you thinking?

[DvsVr4]

Just tried to pm you but, it said your over your mailbox quota.
heres my email, feel free to email me dvsxtc@me.com

Thanks

[Oblivion]

DvsVr4 sorry I got so busy studying/working/lazy I didnt get around to emailing you, suspension is still available if you want it.

Also have a hard pipe and intake elbow if theres any takers...

Any donation for it kindly accepted
63059

[Oblivion]

ARC 1.3 bar radiator cap anyone? Very rare! So gutted it doesnt fit my alloy radiator :( $30
63167

[Adam.Findlay]

Ill take the ARC cap. my cap just shagged the rubber seal.
txt me on 0277107477 please

[Gly]

ARC 1.3 bar radiator cap anyone? Very rare! So gutted it doesnt fit my alloy radiator :( $30
63167

big or small end?

[Oblivion]

Will txt you soon Adam.
Im not sure what you mean Carsten, it fits the stock radiator which is as much as I know.

[CANDEE]

That means it will be a small end or a Type-B Aaron. :)

[Oblivion]

Free! If anyone can pick them up.

6339663394

[Oblivion]

Tomei universal oil pan baffle

63989

Forces from acceleration, deceleration and cornering will affect the oil in the sump which can cause the the sloshing of the oil away from the pickup. The one way rubber valve keeps the strainer always submerged in oil to help prevent oils starvation under hard driving.
Heres an idea of how it works.

63988

The oil strainer for VR4 sump is located near two sides of the sump so only two plates are needed to surround the strainer, these are the other two that I didnt need to use. Original cost was about $160, grab it for just $60!

[Oblivion]

Heres some pics of the suspension- King superlow springs and KYB shocks

6401564016

Gives a good drop in height but still clears speed humps fine, handles great with these especially on the open road without the ride being too hard.
Nice compromise on coilovers without the expense, yours for just $300 - less than the cost of new springs alone!

[Oblivion]

Bump - someone please buy :P

[kumarr]

Bump - someone please buy :P

hey mate how much just for the springs? my number is vodafone0494800

[Oblivion]

hey mate how much just for the springs? my number is vodafone0494800

I would rather sell them together as the shocks were matched to the springs, if I sold just the springs then the shocks wouldnt be much use to anyone. Will let you know if I do decide to split them though.

[kumarr]

I would rather sell them together as the shocks were matched to the springs, if I sold just the springs then the shocks wouldnt be much use to anyone. Will let you know if I do decide to split them though.
whats your number? do you have a pic of the car with these on?

[Oblivion]

The is the best pic I can find with that suspension in, this is with 18 inch wheels and 225/40 tyres
64119

Found another pic with dirt also lol
64120

[Oblivion]

Suspension has been sold!

Oil pan baffle still available..... reduced to $50...... cheaper than fixing an oil starved engine!

[Adie]

Is the baffle kit complete? Also what is involved in installing it?

[Oblivion]

The baffles are from a universal kit which has 4 plates, to baffle the VR4 sump only 2 are needed as the strainer is located near the corner. I'll upload a pic when I get home to show what I mean. The plates do need to welded in place and adjusted to suit, I had a fabricator do this for me to save me the frustration of trying to get it right lol.

[Oblivion]

Hope this makes it a bit clearer - the red circle is where the strainer is and the blue lines are where I put the baffle plates.
64379

If you want to send me your sump I could have it fitted for you (additional $ though)