PDA

View Full Version : fl ecu question



darren1976
16-04-2013, 06:34 PM
i have a pfl legnum vr4 and been told it to find a fl ecu will it plug in a work and is better to remap

Wobble
16-04-2013, 08:05 PM
fl ecu will plug straight in , speak to jason ( foxdie) for a remap or eurospec to get the best out of it

darren1976
16-04-2013, 08:34 PM
would you know the part number for facelift ecu

Wobble
16-04-2013, 08:55 PM
actual part number i dont , 7202 or 7203 is the ecu you need

Davezj
17-04-2013, 04:39 PM
Have a look at the ecu you have in the car at the moment, some pfl were fitted with a 7202 processor ecu this will have a plastic case and the part number in it will end in 288 or 289 these are flashable ecu with ecu flash, the metal case ecu are flashable as well but the software (mmc) is about £150 on top of the cost of the cable (£120) to do it. Where as the ecuflash is free open source software. Developed by people on openecu.org so not many people have he MMC software.

darren1976
17-04-2013, 09:44 PM
its a metal cased ecu so out of luck i think