PDA

View Full Version : lambda sensor



MYKEY
08-05-2013, 11:41 PM
I think I may need to replace my lambda sensor, would there be any benefit in fitting a wideband one instead of the standard narrow band ?

Thanks :upsidedow

paulg23
08-05-2013, 11:46 PM
I think I may need to replace my lambda sensor, would there be any benefit in fitting a wideband one instead of the standard narrow band ?

Thanks :upsidedow

The standard ECU wont connect directly to a wideband lambda sensor. You would have to fit a wideband controller that has a simulated narrow band output on it.
I have a used but good narrow band if you want it. It doesnt have a connector on it... I cut it off to use with my wideband setup.

Nick Mann
09-05-2013, 06:44 PM
I have found that my vr4 was more fuel efficient after fitting a wideband set up and running simulated narrow band.

Davezj
09-05-2013, 08:01 PM
One of the cheapest wideband sensor and controllers with a simulated narrow band output is the MTX-L fron innovate Motorsport.
They can be bought from about £130 new from ebay, and other supplier.