Wiring Diagram Factory Head/Sub/Amp

[Wodjno]

Does anyone have a wiring diagram for the Factory fitted Head unit, Sub, Amp & CD Autochanger 😬
Or point me in the right direction of one 👍

Cheers

Wodj

[GalantOnly]

Yes /yes

What do you need to know, Wdj? :)

[mitsuchick]

im in need of the wiring diagrams as well!
Please and thank you

[GalantOnly]

It's a book and not a file. So just tell me what you need to know

[mitsuchick]

which colours are what, to go to an aftermarket deck.

something like this
http://www.the12volt.com/installbay/stereodetail/1547.html

[Davezj]

I had a factory sub in the boot and did not realise the amp under the left boot floor small cubby was used to drive the sub, well i believe it is, as mine does not work any more. I removed this amp and binned it to get more storage space as I replaced it with a standard storage box.
I am not into big sound in a car so it did not make that much difference for me, but if I wanted to use it I would have to buy a new amp for it.
Silly me!

I did this about 2 years ago so don't hate me for doing it.

[GalantOnly]

which colours are what, to go to an aftermarket deck.

Do you have a MMCS, with or without the factory amplifier or just a standard setup?

[GalantOnly]

I had a factory sub in the boot and did not realise the amp under the left boot floor small cubby was used to drive the sub, well i believe it is, as mine does not work any more. I removed this amp and binned it to get more storage space as I replaced it with a standard storage box.
I am not into big sound in a car so it did not make that much difference for me, but if I wanted to use it I would have to buy a new amp for it.
Silly me!

I did this about 2 years ago so don't hate me for doing it.

That's strange, Dave... The factory amp is driving all the speakers and not the sub only...:o

[Davezj]

That's strange, Dave... The factory amp is driving all the speakers and not the sub only...:o

i think the wiring in the front had been messed with already, my car had a kenwood head unit and 10 disk changer fitted already, when i got it.
the only speaker effected when i removed the amp was the sub in the boot, so i thought the previous owner must have sliced somthing in to drive he sub via the amp in the boot from an output from the head unit.
so it was a bit of a mess.
i think the separate amp driving the sub in the boot is my best option.

[mitsuchick]

i have the factory navigation and cd changing in the boot.
standard tape deck seperate unit than the slide out navi.

im keeping the navi in and just changing out the tape deck.

[GalantOnly]

1 - Yellow/Red - Rear right speaker +
2 - yellow/blue - Rear left speaker +
3 - white/black - Antenne amplifier signal
4 - green/white - Tail lamp relay (lights ON signal)
5 - white/blue - Front left speaker +
6 - white/red - Front right speaker +
7 - grey/red - Rear right speaker -
8 - grey/blue - Rear left speaker -
9 - white/blue - Speed sensor
10 - blue - Ignition switch (ACC 12V)
11 - red/black - Fusible link (2) 12V battery power
12 - black/yellow - Rheostat
13 - black/blue - Front left speaker -
14 - black/red - Front right speaker -

[Jan4iks]

63089

[mitsuchick]

1 - Yellow/Red - Rear right speaker +
2 - yellow/blue - Rear left speaker +
3 - white/black - Antenne amplifier signal
4 - green/white - Tail lamp relay (lights ON signal)
5 - white/blue - Front left speaker +
6 - white/red - Front right speaker +
7 - grey/red - Rear right speaker -
8 - grey/blue - Rear left speaker -
9 - white/blue - Speed sensor
10 - blue - Ignition switch (ACC 12V)
11 - red/black - Fusible link (2) 12V battery power
12 - black/yellow - Rheostat
13 - black/blue - Front left speaker -
14 - black/red - Front right speaker -

thank you!

[mitsuchick]

white/blue - Front left speaker +
white/blue - Speed sensor

Duplicate? or is it striped or dotted differently?

[GalantOnly]

Front speaker 1.25mm2 white/blue
Speed sensor 1mm2 white/blue