PDA

View Full Version : WTB Legnum VR4 Front Spring


Confused
19-10-2013, 10:56 AM
Hi all,

I need a standard front spring for my PFL Legnum VR4


Cheers


Garry
Chris.W
20-10-2013, 04:28 PM
Should have one of these sat on a shelf in the workshop.
You just want the one?
Confused
20-10-2013, 04:50 PM
Yeah just the one needed.

Looking at my existing ones, they have a white and red marking on them near the bottom, which denotes the spring rate, so could do with it being the same, if possible :)

Cheers,

Garry
Chris.W
20-10-2013, 08:01 PM
No bother, will have a look up the workshop tomorrow.
Confused
21-10-2013, 05:03 PM
Hi Chris,

Any luck? :) If so, how quickly can you get it down to me?


Garry
exevoowner
21-10-2013, 06:27 PM
If you fancie changing mine over you can have a pair lol
Chris.W
21-10-2013, 06:41 PM
Confused - Right then Garry, I have 2 sets:-

1st - Full set of springs only, appear to have what could be either red or pink and white markings on one of the lower coils. Came off a Legnum VR4.

2nd - Full set springs fitted to dampers, also have very deffinate red markings. Removed from Galant VR4.

Which would you prefer? Tryed to upload photo's but can't seem to. Could SMS them if you send your number to 07530557785.
I have no need for either as running Tein coilovers (and considering changing to BC units with remote reservoirs).

I could have them at the courriers tomorrow afternoon after work (1630) which would see them at you Wed/Thurs.
Confused
21-10-2013, 07:06 PM
Hi Chris,

The first set sound perfect. I'm only needing the one front, but if you want to sell them as a full set, that's fine with me.

PM me your payment details, and I'll send you my address :)

Garry