PDA

View Full Version : Hi, how easy is it to change the lead and coil pack from the middle front



jahooli
21-11-2013, 02:04 PM
Hi, having a misfire issue and can see a spark from the middle front but cant tell if its lead or coil pack. How difficult is it to replace them, I cant see where it goes into the back, is it something a divvy can do?
thanks
Paul

Atik
21-11-2013, 02:25 PM
Yep, cos I can do it!

Not too hard to be fair. There are a few things that need to come off to make access but once you do that, its pretty easy to sort the lead. The coil pack is on the front back so easy to access anyway.

Nick Mann
21-11-2013, 03:16 PM
The coil pack is very easy. Disconnect it from the HT lead and the wiring loom, undo the small bolts that hold it in place and then lift it up and out.

The HT lead is a bit more work, but if you can put things back where you found them it is relatively easy, just takes some time. Have a look for the article in the members area for changing your spark plugs.

jahooli
21-11-2013, 04:59 PM
Thanks for the advice, just need to buy a second hand one now