View Full Version : input shaft help
galant360
28-12-2013, 02:28 PM
Rite guys trying to remove the input shaft but I removed the bolts from the transfer box first and now the shaft will not come otut at all any one got any ideas
c0xxy
28-12-2013, 04:47 PM
Slide hammer will still get it free, just make sure there is something under the transferbox
wintertidenz
29-12-2013, 12:47 AM
Bolt the transfer case back up, then remove it. The weight of the transfer case won't allow the shaft to come out unless those bolts are in.
Chris.W
29-12-2013, 01:33 PM
What both them said. Put the Tx case bolts (or at least a couple of them) back in, screw your slide hammer adaptor into the end of the input shaft and slide/hammer away.
Will have a bit of resistance but then should just pop out.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.