Brake light set up on pfl Legnum

[Neil1985]

Did try to search this but nothing came up. Seen a few Legnums (pfl) with a twin brake light set up.

Is it a case of popping a couple more bulbs in or is it a bit more technical than that.

When I looked before I'm pretty sure there were holders there but can't be sure.

[Davezj]

all PFL should have 2 brake light on each side and a high level brake light.
it should have one brake light on the Body and one brake light on the boot lid, on each side.

[Nick Mann]

What Dave said.

Does yours use them for foglights?

[Neil1985]

Oh really, well the outer ones and top brake light I have but not the two on the tailgate. Unless there blown. Are they a double filament bulb do you know Dave?

No the rear fog isn't using those locations Nick.

Cheers for the replies.

[Nick Mann]

Yes, they are double filament. They are push fit not bayonet. They should act as side lights and brake lights the same as the outers.

[Neil1985]

Thanks Nick. I will have a look and see what bulbs I have laying about. Will let you know my results.

[Neil1985]

All sorted..... There were no bulbs in there at all.

[Nick Mann]

Simple solution! They are always the best ones!

[Neil1985]

That's what I like. Thanks again.

[elnevio]

Yes, I much prefer the four-light look at night! :afro: