swinks
17-02-2014, 01:31 PM
For sale my unfinished project of conversion my Galoon VR4 into twin TD04L turbos.
So... here we go:
- pair of Subaru Impreza turbochargers TD04L-13T. Both turbo been clocked to right direction, also both been refurbished (new bearings and seals). Both turbo have modified exhaust manifold flange to be directly bolted into stock vr4 manifold, rear turbo has custom plate for mounting wastegate actuator.
- oil and water lines etc.
- pair of stock manifolds sligntly adopted for td04's, flanges were milled to change angle of fitting turbo, one manifold has drilled hole for egt bolt-in housing. Both manifolds still require slight porting out exhaust outlet (connecting to turbo) to match turbo hotside entry.
- pair of sainless steel turbo hot side outlets non finished to make exhaust elbow connecting to downpipe, not pretty welding, but done by me, so please excuse me lack of art skills ;)
- several 2.5 inch stainless steel elnows and other curved sections
- pair of wastegate actuators, IIRC rated 0.7 bar.
Anyway, it's not p&p project and requires still plenty of work.
If anyone has extra free time, welding skills and will to go for bigger power, then please, enjoy.
Price: 185 GBP (which is fair for 2 good TD04 turbochargers ;) ) plus shipping.
Can be delivered to Eurospec whilst rolling road day.
6658966590665916659266593665946659566596
So... here we go:
- pair of Subaru Impreza turbochargers TD04L-13T. Both turbo been clocked to right direction, also both been refurbished (new bearings and seals). Both turbo have modified exhaust manifold flange to be directly bolted into stock vr4 manifold, rear turbo has custom plate for mounting wastegate actuator.
- oil and water lines etc.
- pair of stock manifolds sligntly adopted for td04's, flanges were milled to change angle of fitting turbo, one manifold has drilled hole for egt bolt-in housing. Both manifolds still require slight porting out exhaust outlet (connecting to turbo) to match turbo hotside entry.
- pair of sainless steel turbo hot side outlets non finished to make exhaust elbow connecting to downpipe, not pretty welding, but done by me, so please excuse me lack of art skills ;)
- several 2.5 inch stainless steel elnows and other curved sections
- pair of wastegate actuators, IIRC rated 0.7 bar.
Anyway, it's not p&p project and requires still plenty of work.
If anyone has extra free time, welding skills and will to go for bigger power, then please, enjoy.
Price: 185 GBP (which is fair for 2 good TD04 turbochargers ;) ) plus shipping.
Can be delivered to Eurospec whilst rolling road day.
6658966590665916659266593665946659566596