PDA

View Full Version : Legnum speed and rev meter died



Mätsi
15-07-2014, 08:36 AM
So.... Legnums battery first died cause friend of mine forget lights on.

Nice woman with ford gives us back up power........ Well. then legnums 120A mainfuse burns and i buy a new one from mitsubishi and install it. Everything else electric works fine.. car runs etc.. But all meters are down. No back light, no nothing. Fuel meter shows something and all others do nothing. I checked fuse below steeringwheel and it was fine. Voltage behind that fuse is fine. Is there any others fuse behind dash for meters ? Or is there some regulator or something burnt ?

Rev, speed and watertemp are dead. Automatic signal lights works, headlight signal works, indicator signal lights works.

Any help would be nice! Or where i start? buying new from ebay? :D HIcontrast meters..

Mätsi
17-07-2014, 05:43 AM
68960

Problem solved.

Nick Mann
17-07-2014, 06:40 AM
Was the battery connected the wrong way round?

Mätsi
17-07-2014, 07:26 AM
I was starting so i didnt see. but friend was 100% sure that cables connected right way. Buut i fixed meters and now running ok :)

Nick Mann
17-07-2014, 07:49 AM
Well, glad it's fixed! I would put the jump leads on myself next time though!

mivec - pow
17-08-2014, 11:14 AM
That could also be the cause why your 120A fuse blown. Good thing you checked it out.