Possibly breaking Legnum VR4 manual

[peter thomson]

http://www.clubvr4.com/forum/showthread.php?66172-Ebay-Mitsubishi-Legnum-VR-4-Estate-Manual-Transmission-Meister-Blue(99k-ml)-12-Mth

As well as the parts listed in the thread it also has

Greddy oil cooler and filter relaocation kit
Koyo uprated radiator
Greddy intercooler kit

I'll decide this weekend if I will break it and list any more parts that I can think of. All four hubs have also had recent new genuine wheel bearings and the tyres have been replaced with Goodyear F1 assymetrics.
The front lip is no longer available and I may keep the cf bonnet for my original VR4 but I do have a unused GRP from the group buy

[adaxo]

Possibly interested in few bits but need to know prices first, pm on its way.

[Dimes]

Hi Peter
A tempting few bits you have there, PM on the way.

[Erni902]

Hi Peter Id be interested in all 4 bearings with hubs price dependant

[2700gavin]

Hi Peter may be interested in the ecu , seats and harnesses, price and pics dependant.

[mcosworth]

I would be interested in the rear brembo calipers and brake hoses depends of the condition and price.
Cheers,
Mac

[joetheeskimo]

I would take the colliers if they are for sale

[carfanatic]

Why break her, she looks a great car?

[Seems Unlikely]

I will be interested in parts for manual.conversion price dependent, please keep me in mind Peter, PM if u prefer.

[peter thomson]

I'll make a list tomorrow with prices and who has first dibs on parts.

I'll determine whether it goes back on the road this weekend. Depends on how much work it needs and it's worth far more in parts to me and getting my other VR4 back on the road.

[peter thomson]

Greddy oil cooler and filter relocation kit £200 Adaxo, dimes
Tein HA's £300 Adaxo, joetheeskimo, keano
Koyo uprated radiator £200
Evo Recaros with mounting rails £250 2700gavin
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60 dimes
hubs erni902
7202 ecu (foxdie map) 2700gavin
etacs/fusebox 2700Gavin
brembos rear mcosworth
manual conversion Seems unlikely
RPW downpipes, flexis have been replaced £180 GalantOnly
Powerflow catback system Carfanatic
Greddy intercooler kit £250 dodo_ireland
Cusco rear strut bar £80 Dimes
Rear diff ayc, £100
Propshaft £50
Ayc pump £100 keano, Billybobboot

[2700gavin]

Hi Peter don't forget I'm also after the harness eye bolts and bar.

[peter thomson]

Hi Peter don't forget I'm also after the harness eye bolts and bar.

Yes will add those now :)

[GalantOnly]

Do you send outside UK? If so, I might be interested in downpipes.../yes

[peter thomson]

Do you send outside UK? If so, I might be interested in downpipes.../yes

Yes I can send abroad

[peter thomson]

Car is being broken, will let interested parties have pics as soon as parts are off

[Erni902]

Cheers mate, the silver one is in for MOT tomorrow and the Purple one towards the end of October so depending on the outcomes I may be interested in other parts as well as the wheel bearings/hubs. Im possibly expecting the silver one to fail initially

[joetheeskimo]

Intrested in the coilovers.

Thanks

[keano]

I'm interested in the ayc pump depending on condition. And the twin Coilovers if they're height adjustable and in good nick.
Cheers
Danny

[Seems Unlikely]

If a deal is done for the gearbox i will quite possibly drive to collect in which case I may be able to offer a parts taxi for some of the northerly folk ;)
Corin.

[billybobboot]

If ayc pump works ill take it. Mine works but only below 12-14 deg. Was going to get rebuilt but car would be off road till done

[peter thomson]

If ayc pump works ill take it. Mine works but only below 12-14 deg. Was going to get rebuilt but car would be off road till done

keano has already expresses interest but will check over pump tomorrow if I have time, loosening off teins at mo.

[carfanatic]

How many pennies for the cat back.

[billybobboot]

How many pennies for the cat back.

Not very helpful but ive got a cat back for a panda very rusty. You can have that for pennies.

[GalantOnly]

Peter, can you give me the total £ for downpipes shipped to Denmark?

[carfanatic]

You are wrong about not being much help. It was no help at all. Although it probably is a good match for the rest of the Panda.

[peter thomson]

Sorry for not being on but my daughter is in hospital at the moment so everything is kind of on hold at the moment. Will hopefully get things sorted next week and reply to pms and so on

[Erni902]

Sorry for not being on but my daughter is in hospital at the moment so everything is kind of on hold at the moment. Will hopefully get things sorted next week and reply to pms and so on

Sorry to hear that mate, hope its nothing serious. Family comes first (even before us bunch of degenerates apparently). Seriously though hope your daughter recovers quickly. Wish you and your family well.

Rikki

[Dimes]

May I echo Rikki's sentiments. None of this stuff matters when you've got family to think of.
Best wishes Peter

Can you put my name next to the Cusco rear brace please.
Thanks
Olie

[carfanatic]

Peter, As Rikki says, family comes first. Take your time as this is the real gift we offer our families. Colin.

[Seems Unlikely]

As others said, family first, hope she is improving, PM when you ready and offer of help still there. Corin.

[billybobboot]

You are wrong about not being much help. It was no help at all. Although it probably is a good match for the rest of the Panda.
Yer the panda wasnt even worth anything scrap most of the steel was dust. Only got exhaust as it fell off when we picked the car up by a crane.

side note hope she is ok pete.

[Seems Unlikely]

Yer the panda wasnt even worth anything scrap most of the steel was dust. Only got exhaust as it fell off when we picked the car up by a crane.

side note hope she is ok pete.

I did once try to weld a fiat panda, it was quite challenging as my mig set never had a 'thin as tinfoil' setting, I kept blowing holes in it whilst welding. In the end it was irrelevant as I suffered quite a fantastic engine failure whilst going up the big hill on the m62 to Leeds, it did make it to the top but then blew the engine apart on the downhill, holed block, 3 lanes filled with smoke, oil up the sides of the car and dripping from the exhaust.. It's scrap value wasn't so high either.

[peter thomson]

Thanks all. Should be sorting stuff out again this weekend so will be in touch when parts are sorted out

[2700gavin]

Hi Peter , may be interested in the wheels and also after the fuse box/ Etacs unit.

[dazjb]

Hi. Will you be removing the wiring loom? I'll take it if you are. I'm also after a VR4 ECU.

I'm doing the VR4 FTO engine conversion so may need other bits once i source an engine

Cheers
Darren

[peter thomson]

Hi Peter , may be interested in the wheels and also after the fuse box/ Etacs unit.

Hi the wheels require the spacers to fit with brembos. I'll mark the fusebox/etacs for you.

[peter thomson]

Greddy oil cooler and filter relocation kit £200 Adaxo, dimes
Tein HA's £300 Adaxo, joetheeskimo, keano
Koyo uprated radiator £200
Evo Recaros with mounting rails £250 2700gavin
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60 dimes
hubs erni902
7202 ecu (foxdie map) 2700gavin
etacs/fusebox 2700Gavin
brembos rear mcosworth
manual conversion Seems unlikely
RPW downpipes, flexis have been replaced £180 GalantOnly
Powerflow catback system Carfanatic
Greddy intercooler kit £250 dodo_ireland701877018670185
Cusco rear strut bar £80 Dimes
Rear diff ayc, £100
Propshaft £50
Ayc pump £100 keano, Billybobboot

[peter thomson]

Hi loom is no problem and this VR4 has a good engine. I should have other engine ECU's in the shed or loft


Hi. Will you be removing the wiring loom? I'll take it if you are. I'm also after a VR4 ECU.

I'm doing the VR4 FTO engine conversion so may need other bits once i source an engine

Cheers
Darren

[carfanatic]

peter thompson Have you worked out a price for the exhaust yet Peter. How is your daughter?

[peter thomson]

peter thompson Have you worked out a price for the exhaust yet Peter. How is your daughter?

She is on the mend ,thanks. I need to give it a clean and then can let you know

[2700gavin]

Hi Peter , after a hefty bill over the weekend , I am going to have to give up the seats. Sorry about that. I am still interested in the other items dependent on price and condition.

[dazjb]

Hi loom is no problem and this VR4 has a good engine. I should have other engine ECU's in the shed or loft

Thanks, can you let me know when the loom is available and a price please including the ECU for a manual

You a bit far away for me to be picking up an engine from im afraid

Cheers

[peter thomson]

Greddy oil cooler and filter relocation kit £200 dimes
Tein HA's NLA
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails £250
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
hubs erni902
7202 ecu (foxdie map) 2700gavin
brembos rear with HEL brake line £80mcosworth
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
RPW downpipes, flexis have been replaced £180 GalantOnly
Powerflow catback system baffle material coming away from silencer Carfanatic
ARC intercooler kit my mistake, thought it was a greddy £250 dodo_ireland
Cusco rear strut bar £80 Dimes
Rear diff ayc, £100
Propshaft £50
Engine complete with turbos ,no ancillaries £400

[carfanatic]

Pete, don't forget the Exhaust matey. Colin.

[GalantOnly]

Should we close the downpipe deal soon? :)

[2700gavin]

Peter what condition is the fuel filler neck ?

[Nick Mann]

Have you got a good maf Peter?

[peter thomson]

Peter what condition is the fuel filler neck ?

It is holed due to rust :(

[peter thomson]

Have you got a good maf Peter?

sent pm

[peter thomson]

Should we close the downpipe deal soon? :)

As soon as I have split it from the cat and cleaned it up I will be in touch

[peter thomson]

Pete, don't forget the Exhaust matey. Colin.

It's off the car but while tidying it up I have found the baffle material is starting to come away from the silencer so not sure how much use it will be at the moment

[carfanatic]

It's off the car but while tidying it up I have found the baffle material is starting to come away from the silencer so not sure how much use it will be at the moment

can you take a pic Pete please?

[dazjb]

Would have bought that engine from you had you not been so far away :(

[peter thomson]

can you take a pic Pete please?

Will do

[peter thomson]

Would have bought that engine from you had you not been so far away :(

I can look into courier costs

[carfanatic]

Please do Pete. Many thanks.

[Dimes]

Hi Peter

Do you know what size the Koyo uprated radiator is ? Some pics to
And cross me off for the motor mounts please, I'll never get round to fitting them.
Also mate can I get the age and mileage on the clutch please, I'm assuming you're waiting to check condition before pricing.

Best Wishes
Regards Dimes

[peter thomson]

The rad ends need to be reattached so cant sell it at the moment as is and will depend on what it will cost to be repaired. The rad has a much bigger core than the standard one and being copper far at keeping temperatures down. Hope to remove gearbox this weekend dependant on weather.


Hi Peter

Do you know what size the Koyo uprated radiator is ? Some pics to
And cross me off for the motor mounts please, I'll never get round to fitting them.
Also mate can I get the age and mileage on the clutch please, I'm assuming you're waiting to check condition before pricing.

Best Wishes
Regards Dimes

[peter thomson]

Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails £250
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes, Louis
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
Front hubs facelift for brembos with recent genuine wheel bearings £300
7202 ecu (foxdie map) 2700gavin
brembos rear with HEL brake line £80 mcosworth
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
RPW downpipes, flexis have been replaced £180 GalantOnly
Tein HA's fronts only £100
Powerflow catback system baffle material coming away from silencer Carfanatic
ARC intercooler kit my mistake, thought it was a greddy £250 dodo_ireland
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400

[Dimes]

Oh very nice, a copper core radiator.

[evo1rs]

I may be interested in the diff, roughly what mileage is it please?

[peter thomson]

I may be interested in the diff, roughly what mileage is it please?

I'll check that at the weekend. Needs a new seal which I may have

[evo1rs]

Ok, so, on my way home my rear diff exploded! (exaggerating slightly) and I've had to disconnect it in order to move anywhere. I'm hoping that driving home on FWD only hasn't killed the viscous centre aswell.
So, is there any chance of express delivery on that diff?
Pretty please

;)

[peter thomson]

Ok, so, on my way home my rear diff exploded! (exaggerating slightly) and I've had to disconnect it in order to move anywhere. I'm hoping that driving home on FWD only hasn't killed the viscous centre aswell.
So, is there any chance of express delivery on that diff?
Pretty please

;)

I should be able to get it away on Monday if thats ok for you

[evo1rs]

That would be fantastic! I'll pm you

[peter thomson]

704167041770418704197042070421704227042370424

Some pictures of parts that have been asked for. Hi res originals available if you pm me with an email address

[peter thomson]

bump

[GalantOnly]

Is Downpipe ready for travel abroad?

[peter thomson]

Is Downpipe ready for travel abroad?

pm sent

[Erni902]

Peter my apologies I completely forgot to let you know that I no longer require the hubs/bearings.

Rikki

[peter thomson]

Peter my apologies I completely forgot to let you know that I no longer require the hubs/bearings.

Rikki

No problem

[peter thomson]

I have some free time this week to sort out parts and delivery. All parts are fairly accessible at the moment so if you need any pics or more info let me know

Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails £250
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes, Louis
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
Front hubs facelift for brembos sold
7202 ecu (foxdie map) 2700gavin
brembos rear with HEL brake line £80 mcosworth
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
RPW downpipes, flexis have been replaced £180 GalantOnly
Tein HA's fronts only Sold
Powerflow catback system baffle material coming away from silencer Carfanatic Sold
ARC intercooler kit my mistake, thought it was a greddy £250 dodo_ireland
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400

[carfanatic]

Hi Peter. Thanks for the heads up. pm me with total cost inc delivery to Mid-Cheshire pls. Colin

[Davezj]

Hi peter sent pm about tein ha's

[peter thomson]

Hi Peter. Thanks for the heads up. pm me with total cost inc delivery to Mid-Cheshire pls. Colin

I'll get a price for delivery tomorrow

[GalantOnly]

alexx@youmail.dk

[lateshow]

I would have bought both brembos but seems that you already sold the back pair. Can you still send me pictures of your front brembos?

[peter thomson]

alexx@youmail.dk

Pictures were sent last week

[GalantOnly]

Pictures were sent last week

How much can you ship it for? :)

[peter thomson]

My printer has failed so will have to replace it before and I can send out some parcels as some couriers need a printed label

[peter thomson]

How much can you ship it for? :)

I'll need an area code please

[peter thomson]

I would have bought both brembos but seems that you already sold the back pair. Can you still send me pictures of your front brembos?

Just not had time to clean them yet

[2700gavin]

Hi Peter can you send pics of the harness bar and eye bolts ?

[peter thomson]

Hi Peter can you send pics of the harness bar and eye bolts ?

Sorry had forgotten that I had not done that. Will sort the out this weekend.

[GalantOnly]

I'll need an area code please

2860

[peter thomson]

Hi Peter can you send pics of the harness bar and eye bolts ?

Pics attached

[peter thomson]

17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
HKS SQV dump valve £30
Carbon effect dash £70
Climate control unit £15
Front standard strut brace £25
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails £250
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 Louis
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu (foxdie map) 2700gavin
brembos rear with HEL brake line £80 mcosworth
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
RPW downpipes, flexis have been replaced sold
ARC intercooler kit my mistake, thought it was a greddy £250 dodo_ireland
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400

[Pugme]

I manage to round off one of the hardlines going into my ayc pump, when u removed your pump did you cut the lines? Or manage to unbolt them from the pump?

If the latter, can I have a foot of hardline please with the fitting on the end :-)

[peter thomson]

I think I have a good set in the shed. I'll check tonight


I manage to round off one of the hardlines going into my ayc pump, when u removed your pump did you cut the lines? Or manage to unbolt them from the pump?

If the latter, can I have a foot of hardline please with the fitting on the end :-)

[Pugme]

Ah sweet.

I'll have to order me a bleed kit so I can maybe get my ayc actually working :-)

[peter thomson]

PM,d some who have noted interest in some parts ,rear brembos and intercooler kit. some prices reduced

17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
HKS SQV dump valve £30
Carbon effect dash £70
Climate control unit £15
Front standard strut brace £25
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails now £225
Harness eye bolts 2700Gavin
harness bar £80 in
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu (foxdie map) £120 2700Gavin
brembos rear with HEL brake line £80
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
ARC intercooler kit my mistake, thought it was a greddy £250
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[peter thomson]

intercooler kit available again

[peter thomson]

Rear brembos available, prefer to now sell together

[Dimes]

Rear brembos available, prefer to now sell together

PM Paul Bonner. I believe he's after a set of rears

[crazydriver81]

Dimes: still want to have the rear strut bar? I could Need one :)

[Dimes]

Hi Peter
A few questions if you will, what is the condition of the climate control screen? If it's good? I'll take it
Do the wheels need 25mm spacers with a 42 offset? I may be interested? Can you post some pics please
And I've found out today I can fix my car, do you have any NS rear arms? I may need all three.
I'm ready to receive parts whenever your ready to send good Sir.
Thanks a lot
Regards Dimes

[Dimes]

Dimes: still want to have the rear strut bar? I could Need one :)

Sorry mate you have no idea how much I want that Strut Bar............
It's a part I've been trying to buy since owning a VR4 and I've almost bought one three times but missed out every time.
There was another one on the forum for sale a short while ago, I can't remember who was selling though.

[peter thomson]

I'll check the screen but I have more than one of these in boxes somewhere.

The wheels need the spacers for brembos, ok if standard.

I have the front rear but need to check if I have any others from last car as these ones did not want to come off.

I'll try and get all the parts together this week.




Hi Peter
A few questions if you will, what is the condition of the climate control screen? If it's good? I'll take it
Do the wheels need 25mm spacers with a 42 offset? I may be interested? Can you post some pics please
And I've found out today I can fix my car, do you have any NS rear arms? I may need all three.
I'm ready to receive parts whenever your ready to send good Sir.
Thanks a lot
Regards Dimes

[Dimes]

OK mate, if you find a good one I'll take it.

I was wondering what size spacers are required? I needed 25mm spacers to fit my old alloys over Brembos and that was just to large for me to be comfortable with. I didn't know the offset unfortunately hence the question . If yours require smaller spacers? I may be interested

Not to worry on the NS rear arms Peter, I found a full set yesterday.

Anytime you're ready is good for me mate, I don't need the parts until next year anyway. My car is a three legged Dog at the moment and ain't going anywhere.

Keep me posted
Regards Dimes

[crazydriver81]

PM,d some who have noted interest in some parts ,rear brembos and intercooler kit. some prices reduced

17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
HKS SQV dump valve £30
Carbon effect dash £70
Climate control unit £15
Front standard strut brace £25
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails now £225
Harness eye bolts 2700Gavin
harness bar £80 in
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu (foxdie map) £120 2700Gavin
brembos rear with HEL brake line £80
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
ARC intercooler kit my mistake, thought it was a greddy £250
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

sent you a PM regarding front strut brace and PFL rear spoiler.

[peter thomson]

17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
HKS SQV dump valve £30
Carbon effect dash £60
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails now £200
harness bar £80 in
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu £120
brembos rear with HEL brake line £80
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
ARC intercooler kit £250
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[Pugme]

Is the harness bar still going? I think stupidity will get the better of me and it will compliment my interior perfectly although very much not needed!!

[peter thomson]

Is the harness bar still going? I think stupidity will get the better of me and it will compliment my interior perfectly although very much not needed!!

It may be as no word from Gavin since I posted the pictures for him

[Pugme]

I'm on it!! Lol my drift drag race car that can't corner fast cos the wheels might rub definitely needs harnesses :-)

[peter thomson]

17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
HKS SQV dump valve £30
Carbon effect dash £60
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
Evo Recaros with mounting rails now £200 Sold pending payment
harness bar £SOLD
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu £120
brembos rear with HEL brake line £80
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
ARC intercooler kit £200 reduced
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[carfanatic]

peter Thompson can you send or post a pic of the recaros please. Col.

[peter thomson]

peter Thompson can you send or post a pic of the recaros please. Col.

couple in post 38, can get more though if needed

[carfanatic]

Private msg sent to you. C

[peter thomson]

Private msg sent to you. C

Not received one so far

[carfanatic]

Hi Peter
Sent one now. Not sure what I did last night but it didn't get sent. Colin.

[peter thomson]

17" Alloys, have some blemishes as been off car for a while(Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
HKS SQV dump valve £30
Carbon effect dash £60
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu £120
brembos rear with HEL brake line £80
Brembos front with HEL brake lines £180
manual conversion Seems unlikely, crazydriver
ARC intercooler kit £200 reduced
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[carfanatic]

peter thompson 17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600

Do you have a pic and do you have the spacers for the brembo fit. Seats are in, look cool.

[carfanatic]

peterthomson Sorry Peter, forgot to ask. How are you feeling?

[peter thomson]

peter thompson 17" Alloys, refurbished and practically perfect (Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600

Do you have a pic and do you have the spacers for the brembo fit. Seats are in, look cool.

I'll take some pics this weekend. I have the spacers and extended studs.

Just waiting for more tests but fine at the moment,thanks

[peter thomson]

72091720997209872097720967209572094720937209272100 Pics of wheels and tyres, have some blemishes as been a while since taken off the car

[peter thomson]

721037210272101721047210572106Tanabe exhaust, not sure if it is just the back box but this is very loud. Bit scabby but was not leaking before removal from another legnum we have . It has a plug fitted which does help keep it a bit quitter, Some dents as well

[justslow]

Hi Peter, what would be your price for the Dump Valve delivered to Worcestershire ?
Also, what does the 'Intercooler Kit' consist of ? Is it all the pipework as well ?
Best regards, Mark

[peter thomson]

Hi Peter, what would be your price for the Dump Valve delivered to Worcestershire ?
Also, what does the 'Intercooler Kit' consist of ? Is it all the pipework as well ?
Best regards, Mark

Hi £6 for delivery for the valve

The intercooler comes with joiners to connect to the existing metal pipes and spacers for the crash bar to move it slightlt forward. These do not cause any difference to the bumper fitment. Trans oil cooler was also oe . No mods to it with this intercooler. Post 67 has a pic, can send hi res if still interested

[justslow]

Pm'ed

[peter thomson]

17" Alloys, have some blemishes as been off car for a while(Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
Carbon effect dash £60
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu £120
brembos rear with HEL brake line £80
Brembos front with HEL brake lines £180
manual conversion sold
ARC intercooler kit. no crash bar modding £200 reduced
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[peter thomson]

FAO Imson , your mailbox is full but brembos are from an Evo8 strutbrace is reserved but carbon dash is avaiable

[Imson]

So the brembo is complete? :)
Can you send me picture? I have delete my mailbox :)

[peter thomson]

So the brembo is complete? :)
Can you send me picture? I have delete my mailbox :)

Brembos are complete. I'll get some pictures sorted out

[Imson]

That sounds good. :)
Do you think i need other hubs? Coz i got early legnum :)

Regards joakim

[peter thomson]

That sounds good. :)
Do you think i need other hubs? Coz i got early legnum :)

Regards joakim

You would need hubs

[crazydriver81]

Peter you have PM :)

[gr fto reborn]

Interested in the engine. What's the mileage etc?

[peter thomson]

Pics of the brembos

[crazydriver81]

That sounds good. :)
Do you think i need other hubs? Coz i got early legnum :)

Regards joakim

Joakim, you definitely need FL hub carriers (found on models 1999 onwards) with 160mm mounting hole distance to fit the Brembos.

Peter, if Imson does not take the Brembo calipers, I express my interested.

[SirWazzz]

Hey Peter! Coming in late but wonder if you have the skid guard (if that's what it's called; plastic thing that mounts under the motor) & the front VR4 grille badge?

Cheers! ;)

[peter thomson]

Hey Peter! Coming in late but wonder if you have the skid guard (if that's what it's called; plastic thing that mounts under the motor) & the front VR4 grille badge?

Cheers! ;)

Afraid I don't have a spare of that one, tow eye cover.

[peter thomson]

Galant facelift rear spoiler £75
Super VR4 rear spoiler £400

17" Alloys, have some blemishes as been off car for a while(Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
Carbon effect dash £60
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit £200 dimes
Koyo uprated radiator ,repair pending before it can be sold
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60
7202 ecu £120
brembos rear with HEL brake line £80 sell as a set for £240 boxed and ready to post
Brembos front with HEL brake lines £180

ARC intercooler kit. no crash bar modding £200 reduced
Cusco rear strut bar £80 Dimes
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[peter thomson]

bump

[Xaxasv6]

You got pm ;)

[peter thomson]

Short shift gear lever kit £30
Manual hi viz dash £50

Galant facelift rear spoiler £75 Mark Sanne
Super VR4 rear spoiler £400

17" Alloys, have some blemishes as been off car for a while(Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
Carbon effect dash £60 Mark Sanne
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit sold
Koyo uprated radiator ,repair pending before it can be sold
OS Giken Twinplate R2CD clutch sold
Energy Suspension polyurethane engine mounts £60
7202 ecu £120 Mark Sanne
brembos rear with HEL brake line £80 sell as a set for £240 boxed and ready to post
Brembos front with HEL brake lines £180

ARC intercooler kit. no crash bar modding £200 reduced Bigsed
Cusco rear strut bar sold
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[peter thomson]

bump. open to offfers

[Dimes]

What a lovely box of bits, thanks for the quick delivery Peter. Shiny and like new, a pleasure doing business Mate.

[peter thomson]

Great, glad to hear they have arrived :)

[peter thomson]

Short shift gear lever kit £30
Manual hi viz dash £50

Galant facelift rear spoiler £75 Mark Sanne
Super VR4 rear spoiler £400

17" Alloys, have some blemishes as been off car for a while(Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
Carbon effect dash £60 Mark Sanne
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit sold
Koyo uprated radiator ,repair pending before it can be sold
OS Giken Twinplate R2CD clutch sold
Energy Suspension polyurethane engine mounts £60
7202 ecu £120 Mark Sanne
brembos rear with HEL brake line £80 sold
Brembos front with HEL brake lines £180 sold

ARC intercooler kit. no crash bar modding £200 Sold
Cusco rear strut bar sold
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[ianturbo]

if the ECU dont go ,can i be second dibs ?
ian

[peter thomson]

if the ECU dont go ,can i be second dibs ?
ian

sure

[peter thomson]

Short shift gear lever kit £30
Manual hi viz dash £50

Galant facelift rear spoiler £75 Sold
Super VR4 rear spoiler £400

17" Alloys, have some blemishes as been off car for a while(Rays 'Serie Versus Turismo, Conspired by Rays': 17x7.0JJ +42 Off. Date:1999 6.01 Spada, VESTA) fitted with Goodyear F1 with hardly any use will only fit with brembos with the spacer kit£600
Carbon effect dash £60 Sold
Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Greddy oil cooler and filter relocation kit sold
Koyo uprated radiator ,repair pending before it can be sold
OS Giken Twinplate R2CD clutch sold
Energy Suspension polyurethane engine mounts £60
7202 ecu £120 Sold
brembos rear with HEL brake line £80 sold
Brembos front with HEL brake lines £180 sold

ARC intercooler kit. no crash bar modding £200 Sold
Cusco rear strut bar sold
Propshaft £50
Engine complete with turbos ,no ancillaries £400
Transferbox £150

[stuball]

Do you have down pipes?

[peter thomson]

Do you have down pipes?

Afraid not

[peter thomson]

Short shift gear lever kit £30
Manual hi viz dash £50

Super VR4 rear spoiler £400

Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Koyo uprated radiator ,repair pending before it can be sold
Energy Suspension polyurethane engine mounts £60 last call on these as just going to fit to our other VR4

Propshaft £50
Transferbox £150

[Erni902]

Energy Suspension polyurethane engine mounts £60 last call on these as just going to fit to our other VR4

Peter are the poly engine mounts in decent condition? Also is it just the engine side mount and the gearbox side mount or are the front and rear roll stops included? If you could take pics of the centre holes where the bolts feed through that would be great. If they are in better condition than the ones I have here then Ill take them.

[peter thomson]

It's all 4 and I just need to add some rods to one of the mounts as it can suffer over time without these

[Tarps87]

Manual hi viz dash £50


Is the pfl or fl, I believe the AYC bars are different?

Looking for an undamaged insert unless the milage can be changed for I direct swap.

[peter thomson]

Is the pfl or fl, I believe the AYC bars are different?

Looking for an undamaged insert unless the milage can be changed for I direct swap.
It's from pfl

[Tarps87]

It's from pfl
That sounds perfect, can you pm payment details and p&p cost to me (delivery to luton)
Thanks

[peter thomson]

Short shift gear lever kit £30
Manual hi viz dash £sold
Super VR4 rear spoiler £300

Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Front/rear driveshafts £50 each
Koyo uprated radiator ,repair pending before it can be sold
Energy Suspension polyurethane engine mounts £60 last call on these as just going to fit to our other VR4

Propshaft £50
Transferbox £150

[zinqzinq]

Hi,Have u got speedo for sale?

[peter thomson]

Hi,Have u got speedo for sale?

it was just sold

[peter thomson]

Short shift gear lever kit £30
Super VR4 rear spoiler £300

Climate control unit £15
Front suspension upper and lower control arms all oem £30 each
Koyo uprated radiator ,scrapped


Transferbox

plus many other parts

[peter thomson]

bump