FL I/C Hot Side Metal Pipe

[bigsed]

As title! Looking for the metal IC hot feed pipe for a FL.

Thanks
Mike

[adaxo]

Have one there :-) is yours leaking?

[Davezj]

if it is for the intercooler swap then you need the PFL hot side pipe to put the hot side pipe end in the correct position to connect with just an elbow to the intercooler as long as the intercooler inlet is at the bottom of the side.

[bigsed]

Its not for a swap, just a straight replacement. Adam diagnosed a boost leak and that pipe is quite rusty so could be the culprit.

[Davezj]

fair enough.

[bigsed]

fair enough. Although I could easily be persuaded that a new IC is needed ;)