Injector seals complete Kit £18

[Davezj]

Hi all,
i have found an alternative source for injector seals for the VR4 standard injector.

here is the standard injector with original seals fitted to show you where they are fitted.

70631


from Top of picture to bottom

Filter basket
Mitsi part number :-no info
Mitsi Price each:- no info

O-ring fuel rail seal
Mitsi parts number:- 1465A188
Mitsi price each:- £4.88

Spacer to fuel rail (mitsi call this a sheet)
Mitsi part number:- MD614805
Misu price each:- £5.77

Injector seal to inlet manifold (mitsi call this insulator)
Mitsi part number:- MD087060
Mitsi price each:- £2.59


This is what you get from me.
24 parts to fix all 6 injector.

70632

I am selling this kit of seals and filter baskets for £18 includes delivery to UK.

The kit is ready to be dipatched so give me a shout and you to can make a massive saving over mitsi prices.

i don't have a hugh qantity of these parts, so it is a first came first served basis.
i can get more but it depend on demand.


if wanted i can do a how to guide to fitting it is no more difficult than changing the spark plugs.


Just post up in this thread if want a kit.

[Davezj]

i have already put a couple of sets aside for the guys at the dyno day, just post up in this thread to confirm Confused Colin Wiltshire

[fassi1]

That is very cheap Dave, great opportunity for somebody still with ori seals.

[Erni902]

Ill take a set please Dave if you've enough

[adaxo]

Just to add that I have this set of dave seals fitted few days back and they fit properly and SEAL properly, you be surprised how huge difference is between old and new, old ones are simply hard as plastic. No boost leak anymore, thanks Dave.
It's worth to mention that this seals are the same in various mitsubishi models incl evo swinks may someone from mlr will need them.

[Davezj]

Ill take a set please Dave if you've enough

i put a set asside for you.
pm me your address and i will send paypal details.

[Davezj]

Just to add that I have this set of dave seals fitted few days back and they fit properly and SEAL properly, you be surprised how huge difference is between old and new, old ones are simply hard as plastic. No boost leak anymore, thanks Dave.
It's worth to mention that this seals are the same in various mitsubishi models incl evo swinks may someone from mlr will need them.

obviously it would cheaper for evo engines due to only 4 injectors.if swinks wanted any kits.

[swinks]

obviously it would cheaper for evo engines due to only 4 injectors.if swinks wanted any kits.
Ha ha ha.
I have done this 1 year ago once fitting set on new injectors :)
I will ask on MLR as single sale etc., but not gonna post anything about GB, due to their weired rules regarding GB and so on.

[Davezj]

Ha ha ha.
I have done this 1 year ago once fitting set on new injectors :)
I will ask on MLR as single sale etc., but not gonna post anything about GB, due to their weired rules regarding GB and so on.

i am not into group buys they are to difficult to organise much prefer to do it on an individual basis.
if you want to just link to this post from MLR that is OK, i can get more sets on an individual basis but it might take a bit longer.

[galantnight]

Hi dave can I have a set ?

[giblet]

Just what I need after our findings from the boost leak test last month. Are you able to stick one set aside for me please Dave? Need to speak to Adam to arrange a suitable date to drop my car off to his to get the lifters replaced so makes sense to get these changed at the same time.

[Davezj]

i will put a set aside for you.

again just pm me your name address including postcode, and a contact phone number.
then i can send you my paypal address.

[Davezj]

Just what I need after our findings from the boost leak test last month. Are you able to stick one set aside for me please Dave? Need to speak to Adam to arrange a suitable date to drop my car off to his to get the lifters replaced so makes sense to get these changed at the same time.


yes i will put a set aside for you.
did you want me to post them or just give them to adam for you when you get the work done.
i will do them £1 cheaper for no postage.

[mcosworth]

Hi Davezj ,
Can I have one set please?
Cheers,
Mac

[Davezj]

Hi Davezj ,
Can I have one set please?
Cheers,
Mac

yes mate no problem, but i am not sure you will need them for you new car. i can do a boost leak test to conformeither way.
but i will put a set aside for you. and again due to no paostage £1 off the price.

[adaxo]

Omg this is flying off the shelf, great idea Dave.

[mcosworth]

yes mate no problem, but i am not sure you will need them for you new car. i can do a boost leak test to conformeither way.
but i will put a set aside for you. and again due to no paostage £1 off the price.

I was told by Chris (fassi1) that he fitted new injector seals, but he also mentioned about 6th injector failure under very hot condition. If you can read his car FS thread you will find it at "bad bits" section.
Cheers,
Mac

[Davezj]

every car apart from one car i have ever done a boost leak test on had leaking injector seals to one extent or another. so i am not surprised that people want to replace them at a good price.
i will see how long it takes to get some more sets. i had 12 sets to start with but i can get more.
it should not take to long if there is enough demand.

[Davezj]

I was told by Chris (fassi1) that he fitted new injector seals, but he also mentioned about 6th injector failure under very hot condition. If you can read his car FS thread you will find it at "bad bits" section.
Cheers,
Mac

is it a petrol injector or gas.
if petrol then i have a spare. if it is gas then i am sure adam can sort you out.

i will take you off the list for seals if they have been replaced already.

[galantnight]

Pm sent

[Davezj]

Pm sent

replied

[galantnight]

Payment sent thanks dave

[carfanatic]

If there is another set available I'll have one please.

[Colin Wiltshire]

I'll still take a set Dave.

[Davezj]

yes got you down on the list colin.
just need an name address postcode and contact number via pm and i will send my paypal address adress.

[Erni902]

Payment sent Dave, cheers

[Davezj]

just thought i wouldlet evrybody know i sold 6 sets of the 12 i had aand i fitted one set to my car ans one set to adams car. so ther are 4 more sets up for greabs.
then i will have to order some more sets.

[mcosworth]

is it a petrol injector or gas.
if petrol then i have a spare. if it is gas then i am sure adam can sort you out.

i will take you off the list for seals if they have been replaced already.

Petrol injector, so I still need some seals.
Cheers,
Mac

[Davezj]

Ok mate I will be able to sort you out on both the seals and the injector.

[mcosworth]

Ok mate I will be able to sort you out on both the seals and the injector.

Thank you Dave!

[Confused]

I'll have 2 sets please (one for the Anglia too) - send me your payment details and I'll let you know my address :)

[Davezj]

Yes two sets is not a problem Gary

[2700gavin]

Is there another set available Dave ?

[giblet]

yes i will put a set aside for you.
did you want me to post them or just give them to adam for you when you get the work done.
i will do them £1 cheaper for no postage.

Will make more sense to give them to Adam. I can send you the money via paypal now if you want, just drop me a PM with your email address. Cheers

[Hansfishberg]

Could I have a complete set please?

[Davezj]

If there is another set available I'll have one please.

i have a set with your name it, colin.

[Davezj]

Is there another set available Dave ?

i have put a set aside for you gavin.

[Davezj]

unfortunately all the sets i have at the moment are prvisionaly sold, but i will contact the supplier and get some more. they did say if i needed more sets they could supply then with a few days.
so i will get them to send another 10 sets over. and hopefully i can sell those too.
so i will put hasfishberg (mustafa) on the list for the next available set. i will let you know when they arrive.

[carfanatic]

Hi Dave, thank you & How do I pay you?

[Davezj]

send me a pm with your name, address postcade and contact phone number
i will send you my paypal address.
if you don't have paypal i can give you my adress and you can send me cheque in the post if you really want to go old skool.

[Hansfishberg]

unfortunately all the sets i have at the moent are prvisionaly sold, but i will contact the supplier and get some more. they did say if i needed more sets they could supply then with a few days.
so i will get them to send another 10 sets over. and hopefully i can sell those too.
so i will put hasfishberg (mustafa) on the list for the next available set. i will let you know when they arrive.

Thank you :)

[Davezj]

for those of you that have paid already, will get the seals out as soon as i can, i have odered some jiffy bags, i think they have arrived but i missed the postman today. so i can pick them up tomorrow.

[menno3x8g]

Do you post to The Netherlands? I would like to take a set too.

[Davezj]

Do you post to The Netherlands? I would like to take a set too.

yes i can send to the Netherlands, but i would have to work out what the postage cost will be.
if give me a PM with you address i will let you know what the postage cost will be, or if there are a few people from the Netherlands that want the seals then i can send to one of you and then you can send the other sets on within the Netherlands.effectively split the cost of the international shipping.

[Davezj]

To everyone that has paid already,
The seals will be taken to the post office tomorrow afternoon when i get back from work, so they will go out in thursday post. look out for a white jiffy bag dropping through your door.
all the best
Dave

[Davezj]

just to confirm, i have 10 more sets turning up monday.

[Davezj]

the following peoples seals where taken to the post office today and sent first class delivery so they should get post through the letter box.
Confused 2x sets
Erni902 1x set
galantnight 1x set
carfanatic 1 x set
2700gavin 1xset

[carfanatic]

Sorry Dave, forgot to tell you I paid. Thanks for posting. C

[Davezj]

Sorry Dave, forgot to tell you I paid. Thanks for posting. C

no problems, i saw your name in the paypal list.

[Davezj]

sent out today TAR 1 x set Jazzcam 1 x set

only colin Wiltshire to go from the first batch set.

[carfanatic]

Thank you Dave, received all present and correct. C. All I need now is to sort out my rad hoses, I think one or two popped today. :-(

[Davezj]

let me find a link to some silicone hoses i found on ebay at a good price.

hang on a mo!


here it is they have red, blue or black they are £26 with free delivery, the one bad point is they are coming from australia so the shipping will take about 3-4 weeks.
http://www.ebay.co.uk/itm/170943289212?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

[galantnight]

Hi Dave,
Got mine today many thanks!!!

[Davezj]

i will do a bit of how to change the seals write up with the spare fueli njector rail and inlet manufold.

i will link to the thread on the first post to make it easy to find.

[carfanatic]

Thanks Dave, they look coolio. C

[Colin Wiltshire]

Haven't I paid you Dave? Thought I did that on wed.

[Erni902]

Received mine today, many thanks Dave :)

[Davezj]

Haven't I paid you Dave? Thought I did that on wed.

sorry colin just rechecked and your payment did come though on the 26th, it was after i checked the rest of the payments at 5.00pm your money came throgh at 20.30 ish
i will get your seals out in the post tomorrow they are all packaged up with a stamp on sat in fornt of me.

[Louis]

Hi, a set for me please, I will pm you, ��

[Davezj]

I will put you on the list for the next batch that I will be getting on Monday.
I will pm everybody from the second batch with my PayPal address as soon as the seals turn up on Monday. I will take any money off people until I get the seals myself.

[Davezj]

Haven't I paid you Dave? Thought I did that on wed.

Colin seal were put in the post this morning so they should be with you on Monday or Tuesday. Sorry again for the delay.

[Davezj]

I know it is costing me money to buy these kits in a batch of 10 but I have no doubts that I will be able to pass these onto club members As it is a no brainer at this price.
If you are going to change or check your plugs anytime soon then it would be rude not to replace the injector seals at the same time.

[Louis]

Pm ��

[Colin Wiltshire]

Colin seal were put in the post this morning so they should be with you on Monday or Tuesday. Sorry again for the delay.

No worries mate, It's not like I was going to do them this weekend anyway, might even be in the new year before I do them lol.

[Colin Wiltshire]

let me find a link to some silicone hoses i found on ebay at a good price.

hang on a mo!


here it is they have red, blue or black they are £26 with free delivery, the one bad point is they are coming from australia so the shipping will take about 3-4 weeks.
http://www.ebay.co.uk/itm/170943289212?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

Item location says China, but priced in. Au $. I'd be a little concerned about the quality at that price. I haven't had a set so could be fine.

[Davezj]

As you say it could be china supplier just selling in AUS.
There was someone selling complete sets of Cooling pipes on cvr4 and they were about £200 for a complete set but you only need the top and bottom hoses out of the kit as all the other pipes can be replaced with normal straight small bore cooling system hose from any motor factors. Unless you want all the cooling system pipes to be colour coded, for some reason. So personally I will be getting some of the pipes I linked to at some point. To see what they are like quality wise.

[paulg23]

Hi. If still available I'll have set please.

[Davezj]

Yes I still have some sets out of the second batch. Send me your name address and contact phone number via pm and I will send your PayPal address.

[elnevio]

I'll have a set, Dave. :) In Salford all week to could collect them at some point to suit you, once you have them of course.

[Davezj]

I'll have a set, Dave. :) In Salford all week to could collect them at some point to suit you, once you have them of course.

yes i have a set for you nev, i will give you a shout when they turn up on monday.

[TAR]

Davezj got mine in the post this morning - many thanks
:happy:

[Confused]

Hoping to get one set fitted on Saturday to the Legnum :)

If there's been no photos/write up done by then, I'll take photos as I go :)

[Davezj]

Hoping to get one set fitted on Saturday to the Legnum :)

If there's been no photos/write up done by then, I'll take photos as I go :)

no I have not done one yet. I was going to do it using a fuel rail and inlet manifold I spare in the shed but not got round to it as there did not seem to be much interest.
but if you can take pictures of the actual change on the car then that would be good.

I was going to start the guide from the point after plenum chamber removal as if you were doing a spark plug change as well.

[Davezj]

Hi guys i got the second batch of seals today, so i will send out my paypal address to all via PM.

[Davezj]

all people that have shown interest in the second batch have been pm'ed

and those people that have said they want to pick up have had set allocated to them.

there are 2 set still available from the second batch of seals. the supplier has said i can get more if required.

[swinks]

Dave, I'm getting fitted new 1000cc injectors, so a new set would be nice. :)
Can you put aside for me? I need 4 injector seals.
Will sort payment on 15th Dec, as I'm in PL for 2 weeks now.

[Davezj]

Dave, I'm getting fitted new 1000cc injectors, so a new set would be nice. :)
Can you put aside for me? I need 4 injector seals.
Will sort payment on 15th Dec, as I'm in PL for 2 weeks now.

as long as you are sure the seals are the correct ones for your injectors then i will put a set of 4 aside for you.
i can always request 4 more from the supplier to make up the set again.

[swinks]

as long as you are sure the seals are the correct ones for your injectors then i will put a set of 4 aside for you.
i can always request 4 more from the supplier to make up the set again.
Lower seals and top feed o-rings are identical, not sure about fuel rail spacer, but I don't need them.

[Davezj]

Lower seals and top feed o-rings are identical, not sure about fuel rail spacer, but I don't need them.

i will include all the seals and spacer and filter baskets in the kit and if you can use them all then you have got them.

[Davezj]

Hi. If still available I'll have set please.

seals will go in the post tomorrow.

[Colin Wiltshire]

Got mine yesterday, Thanks Dave

[Davezj]

Great hear Colin, sorry about the mix up.

[Davezj]

i am send you seals out today nev

[Louis]

Hi, received mine today, thanks, cheers Louis
:)

[lancerevo3]

how much would delivery to ireland be dave ?

[Davezj]

how much would delivery to ireland be dave ?

pm me your address and i will check and get back to you ASAP. i would not have thought it would cost to much as it is a light package. i have allowed £1 for the delivery anyway so whatever the cost is it would be £17 plus the delivery.

[Confused]

I didn't get round to fitting these this weekend... Maybe one evening this week, or next weekend (when I might even do both the Legnum and Anglia!)

[Davezj]

I didn't get round to fitting these this weekend... Maybe one evening this week, or next weekend (when I might even do both the Legnum and Anglia!)

you will be amazed at how hard the old seals are comparision to the new seals. this is one of the reasons why i bought a set of original mitsubishi seals to do a comparison, and the softness was exactly the same.

[Davezj]

Thank you :)

payment received
i have put the seals in the post today.

[paulg23]

Got mine, thanks. :happy:

[Davezj]

glad to hear it paul.
the post office does it job even at this time of year.

[menno3x8g]

Yesterday i got the 4!
Many thanks Dave.

[Davezj]

Yesterday i got the 4!
Many thanks Dave.

Excellent!
Thanks for letting me know.

[Hansfishberg]

Hi Davezj, all arrived today, many thanks :)

[Davezj]

thanks for letting me know.

[Davezj]

swinks seals sent out to day first class post so you should get them tomorrow or Wednesday depending on Christmas post.

[elnevio]

Received mine the other day, Dave. Now added to the To Do list! :sleeping:

[Davezj]

if anyone else wants any of these injector seals, I can get more.
just give me a shout via PM or post up on here and I can order another batch of ten.

[SEAN-NZ]

Could be interested, possibly next week or later, any idea of shipping to nz? I'm guessing it isn't a large or heavy package?

[Davezj]

I have just had an enquiry from someone else in NZ so maybe you could share the international shipping cost
Give VR4_Menace a shout and maybe set up a NZ group by and the shipping will be vastly reduced.
But would be happy to send them out individually the shipping for one set will be £9

[swinks]

Got mine today.
Thanks Dave!

[Davezj]

thanks for letting me know thomasz

[VR4_Menace]

Hey sorry didn't get back to u the other day gonna have to wait till after Xmas now aye

[Davezj]

No problems.
I have ordered another batch as someone else wanted some.
They are here when you need them.

[VR4_Menace]

Coo thanks Davezj

[lancerevo3]

got mine today dave ,thanks very much

mark

[Davezj]

They took there time to get to you mark. But there have been a few bank holidays over that period.
Glad you got them ok.

[lancerevo3]

ya xmas etc but they arrived in one piece

[Davezj]

i still have some of these injecyor seal kits available out of the last batch i bought.

[dazjb]

Be daft not to change these before i drop the engine into the FTO. Can you PM me payment details please bud

Cheers

[Davezj]

i will pm you my details.

[dazjb]

Received today ... cheers matey :)

[Davezj]

glad to hear it.

they are easy to fit as well.

[dazjb]

How have you guys been removing the filter basket? It's tight in there and i don't want to damage anything

[Davezj]

i removed my filter baskets by finding a screw which will bite into the inside of the filter basket ring on the intrance to the top of the injector, the screw only needs to bite on the ring so the screw does not need to go into the basket very far.
fit the screw into a vice and then screw the injector onto the screw, it can go on quite a way in without any worry i have screwed it by about 20mm without any issues. but you only need to screw it on until you get a good bite in the filter basket ring.
then wiggle the injector from side to side and the basket will come out.
it sound a rough way to do it but it works very well.

here is a video to show you the method. it is the first 1 min of the video that shows you how.
https://www.youtube.com/watch?v=V2sD5UsOnJs


just thought i would point out that the VR4 injector does not have a removable pintle cap.

[Confused]

Do you have a spare 1 or 2 filter baskets, Dave?

I've got to replace an injector or two (after I'd already fitted all the new stuff!) - so whilst I could get away with using the almost new rubber bits, I'll be unable to remove the filter basket without damaging it!

[Davezj]

yes mate,
i can pop a couple in the post on monday.
i can get my supplier to send a few more over with the next batch to make the set up.
i have still got your address so all ok there.

[Confused]

You're a star! :) Do you want some money now, or a couple of quid when I next see you? :)

[Davezj]

no it is ok, the filter are not a major cost, it is the seals that cost the money.
i should be able to get my supplier to throw some in for free with next batch of seals i order.

[bungle]

Hi could I get a set of these please. adaxo is going to collect them off you for when he services my car. Do you want me to send you over a paypal payment or give him cash on collection? Thanks

[Davezj]

Cash on collection is fine. As you are not having them posted they are only £17. I will get a set over to Adam, so they available for you when you pop over.

[bungle]

Thats great. Thank you.

[Confused]

Arrived yesterday Dave, thanks very much, you're a star! :)

[Davezj]

No problems Garry.

[Davezj]

Thats great. Thank you.

Glad to here you got them

[dazjb]

i removed my filter baskets by finding a screw which will bite into the inside of the filter basket ring on the intrance to the top of the injector, the screw only needs to bite on the ring so the screw does not need to go into the basket very far.
fit the screw into a vice and then screw the injector onto the screw, it can go on quite a way in without any worry i have screwed it by about 20mm without any issues. but you only need to screw it on until you get a good bite in the filter basket ring.
then wiggle the injector from side to side and the basket will come out.
it sound a rough way to do it but it works very well.

Cheers Dave .. that worked a treat ;)

[Davezj]

i am glad you got it sorted

[hypocrit3]

Hi Dave
Do you have 1 more kit available?
Interested :)

[Davezj]

Hi Dave
Do you have 1 more kit available?
Interested :)

Hi Henrick,
yes i do have a spare set of seals,
drop me a pm with you address and will send you my paypal address.

[Davezj]

just thought i would let people know i still have some injector seal kits left out of the last batch i ordered.

[invisi6le]

Hi, would you have sone available in couple week. I would need one thanks

[Davezj]

Yes I have set you can have.
Drop me a pm when you want them.

[invisi6le]

I will cheers

[Davezj]

Bump

I still have a couple of kit available if anyone is interested.

[Grid]

I'd like one please

[Davezj]

I still have 4 of these kits available from the last order
If anyone is interested.

Sent from my MI 5s using Tapatalk

[Dom B]

Yes please.

[mcosworth]

Hi Dave,
One kit for me please.
Cheers,

Sent from my C6603 using Tapatalk

[Davezj]

i have PM'ed Dom.

Mac do you want me to leave it with adaxo adam so you can pick it. if so it will only be £17 or i can post it to you for £18
if you want it posting, send me pm with your name address postcode and will send it out to you.

[Davezj]

Just thought i would point out that i have had these seals fitted for more than 2 1/2 years and they are still perfectly sealed on the injectors and never had a boost leak from the injectors since.
i am not saying they will last forever. but looking good so far.

[Davezj]

2 sets remaining out of this batch.

i can get more but i have to buy in 10's so i would need a few people to request them before i will order another batch.

[mcosworth]

i have PM'ed Dom.

Mac do you want me to leave it with adaxo adam so you can pick it. if so it will only be £17 or i can post it to you for £18
if you want it posting, send me pm with your name address postcode and will send it out to you.
Yes, please leave it with Adam if you dont mind. Please PM me your PP details so I can pay you tonight. Many thanks.

Sent from my C6603 using Tapatalk

[Davezj]

I still have 2 sets of the injector seals available.

Sent from my MI 5s using Tapatalk

[Grid]

Davezj the seals are ever so grateful!

79202

[Davezj]

Hi guys and girls,
i have just bought a new batch of 10 sets of seals and filters. so they are available to buy if you need them.

let me know by PM or reply to this post.
i have been away from the site for a few months but i am back again and you can now take advantage of my generosity.
just look on viamoto or from Mitsubishi direct, and try and price up a set of these seals.you will not get close to £18 delivered to UK.
for outside the UK it will be £17 plus postage.
i am happy to combine postage for anyone that wants multiple sets of seals and filters. if you want to do your own group buy.

If you want more sets than i have in stock then it might take a little while to get them in as i dont ever buy any more thean 10 sets at a time as i cant afford to tie up that much money in seals sitting on the shelf just in case someone else what to buy some. i am generous but not that generous.
so please take that into account when placing the order.

[Pentagram]

I'll take a set, please.
Cheer.s

Sent from my Phone using Tapatalk

[Davezj]

hi jordan,
drop my a PM (private message) and i will send you my paypal address and you can send me you full name and postal address and i will pop a set in the post for you on tuesday.

hope this is ok for you.

all the best
dave

[Davezj]

Hi guys and girls,
i have just bought a new batch of 10 sets of seals and filters. so they are available to buy if you need them.

let me know by PM or reply to this post.
i have been away from the site for a few months but i am back again and you can now take advantage of my generosity.
just look on viamoto or from Mitsubishi direct, and try and price up a set of these seals.you will not get close to £18 delivered to UK.
for outside the UK it will be £17 plus postage.
i am happy to combine postage for anyone that wants multiple sets of seals and filters. if you want to do your own group buy.

If you want more sets than i have in stock then it might take a little while to get them in as i dont ever buy any more thean 10 sets at a time as i cant afford to tie up that much money in seals sitting on the shelf just in case someone else what to buy some. i am generous but not that generous.
so please take that into account when placing the order.

I still have some of these injector seals if anyone wants some.

[Judder]

I still have some of these injector seals if anyone wants some.

Hey Dave - I'm in for a set of these please as my plan is to increase my boost in the near future with the A'PEXi air and boost control units I have to fit, so it might make sense to re-seat the injectors at the same time

On my Cerbera I had the injectors flow tested at the same time - is it a good thing to do the same with the VR4?

Thanks! Alex

[Davezj]

send me a private message and put your name address and postcode on it and i will send them out to you.

i will send you my paypal address and you can send me the money. very simple £18 for the kit and delivered to mainland UK.

[jahooli]

Ill take a set if you have any left?

[Judder]

send me a private message and put your name address and postcode on it and i will send them out to you.

i will send you my paypal address and you can send me the money. very simple £18 for the kit and delivered to mainland UK.

Perfect - PM sent :thumbsup:

[Davezj]

Ill take a set if you have any left?

I do from this current batch i have 4 sets left.
one for you one for Judder (Alexander).
and two spares.

i will reply via private message.

i can get more but there will be a bit of a delay on the delivery as i will have to order a new batch.

[jahooli]

Came today, thanks Dave

[Davezj]

Excellent
Glad to here it.

[Judder]

Just wondering if anyone took any pictures of how to install these? I've not removed the fuel rail on mine before so any tips welcome :)

[Davezj]

The fuel rail has two ends, regulator on one end and a pipe connector on the other. Each have two screws and one oring. Just undo the screes and pull them off.
Remove injector electrical connectors.
Then the fuel rail itself is held on with 4 bolts with a plastic spacer under each bolt. Don't drop the plastic spacer.
Then just wiggle the fuel rail and it will pull up and off.
The injector might come with the fuel rail they might stay in the inlet manifold, but it does not matter.
The injectors just pull out of the fuel rail. Gentle wiggle side to side will do it.

[adaxo]

Just my 2 pence, I removed fuel rail from about 20 different vr4 s and injectors always stay in fuel rail. Get yourself down on dyno day and with help of others it will be done in less than an hour.

[Judder]

The fuel rail has two ends, regulator on one end and a pipe connector on the other.

Thanks Davezj - tips much appreciated and also thanks for sorting out the kits :) BTW I read through the whole thread yesterday and there's a good link to the YouTube video on removing the basket in the middle somewhere - not sure if it's worth adding that to the first post for easy reference if it's not already?


i removed my filter baskets by finding a screw which will bite into the inside of the filter basket ring on the intrance to the top of the injector, the screw only needs to bite on the ring so the screw does not need to go into the basket very far.
fit the screw into a vice and then screw the injector onto the screw, it can go on quite a way in without any worry i have screwed it by about 20mm without any issues. but you only need to screw it on until you get a good bite in the filter basket ring.
then wiggle the injector from side to side and the basket will come out.
it sound a rough way to do it but it works very well.

here is a video to show you the method. it is the first 1 min of the video that shows you how.
https://www.youtube.com/watch?v=V2sD5UsOnJs


just thought i would point out that the VR4 injector does not have a removable pintle cap.

I also found this pretty good overview (https://www.mitsubishi-forums.com/threads/2000-galant-spark-plug-change-for-v6.46902/) of how to remove the plenum to get to the spark plugs and the fuel rail that it might be worth adding for a reference too - relevant text and photos added here for record

Okies , this is an Mitsubishi 6A13 SOCH 24v intake plenum frum a 1997 Mitsubishi Galant 6A13 2.5 . Mitsubishi 6A1 and 6G7 engines have the same SOCH 24v heads and intake manifolds and plenums. So this will be the same for the USA Mitsubishi 6G72 Galant.

In the first pic , the red circles are where screws that need be removed. the ones on the far end of the plenum are nuts and the rest are bolts. All with a 12MM socket. The arrow is pointing to a far off one. The red coloured bolt is on most models and is bolted to a brace bar on the secondary stabilizer . On the 6G73 and 6G72 it bolts to a bar that connects to the engine mount.

In the second pic , the light blue circles are where the throttle cable and body ground wire bolt onto (10MM bolts) . The dark blue circles are where there is an plenum support bracket bolts to the back of the intake plenum , also 12MM bolts. The red circles are for the 2 (12MM) bolts that secure the Exhaust gas bypass pipe frum the exhaust to the intake plenum. Standing in frunt the vehicle , on the left side the plenum will be a bracket with secondary air bypass valve , and other solenoids which will vary for american models but they can stay on the plenum , juss disconnect the wiring and vacuum hoses that leave the plenum completely and the cruise control vacuum actuator hose.

On the last pic the red circle , is on the opposite side of the plenum , . its a 12MM bolt for a plenum stabilizer bracket.

Usually i unbolt the throttle body frum the plenum , doing away with the hastle of undoing the coolant bypass hoses that goes to the throttle body on models that have them. Make sure not to loose the thin metal gasket that seals the EGG connector pipe when removing the bolts

83167
83168
83169

[Judder]

Get yourself down on dyno day

That would be ideal however even though I'm normally in the UK but the car is in Southern Ireland so not that easy to move around - might need to be a road trip for when the next Dyno day is scheduled /bounce

[Braddy40]

Hi Dave,
Many many thanks for all your help on Garry's Garage day including boost test. As suggested I would like order a set of seals please . Pm sent. Cheers.

[Davezj]

i have replied to you simon.