View Full Version : EOI Legnum Parts
So I have a few parts available from a pre loved 1997 Legnum VR-4... The engine and gearbox have been spoken for...
I will have some parts from the engine for sale at a later date as I won't need a lot of the 8G ignition system etc...
Bender
20-12-2014, 05:21 AM
Is the engine loom being sold with the engine or will you sell it by itself?
If so what kind of condition is it in?
I'm keeping the engine, so I don't need the loom.
It's in good condition
Also the gearbox is now available
Bender
20-12-2014, 08:10 AM
Is the loom for an manual or auto?
And how much are you wanting for it?
Bender
21-12-2014, 05:26 AM
Are you able to get few photos of the loom?
mattnz
21-12-2014, 10:06 PM
That looks very well 'loved' :p
Don't suppose you'll part with the engine cover?
I will, I don't need it.
My one doesn't use them.
It does have a few cracks in it though
Bender
22-12-2014, 06:39 AM
No rush on the photos of the loom, Just when ever you can :)
sjmd1983
22-12-2014, 06:47 AM
Rear diff?
Kenneth
23-12-2014, 01:56 AM
What was the gearbox like? (shift well etc)
How much for it + clutch & flywheel (assuming they were OK as well)
What was the gearbox like? (shift well etc)
How much for it + clutch & flywheel (assuming they were OK as well)
I'm looking around the $6-700 mark for it, plus shipping. It drove really well, shifted mint, my brother had it from 50,000 kms and we have replaced the clutch twice I think, it's now done 130,000. I used it for a couple of years while he was living in the UK.
I'll be looking to dismantle some of the car this weekend and get some of the parts out, I'll post up pics of the box + clutch etc once I have them removed.
CANDEE
23-12-2014, 08:06 AM
Shift cables and the bracket that holds them on the box?
To be honest I haven't had a look at them yet, I may use them on mine.
But I will let you know.
CANDEE
23-12-2014, 08:48 AM
No Biggie if you do. I have other sources. :)
Update, Here's some interior pictures, all the door cards are in good condition. as are most of the front interior panels.
7093070931709327093370934
mattnz
29-12-2014, 12:01 AM
Steering wheel?
Kenneth
29-12-2014, 01:14 AM
Let me know when you have it out. If you could get a shipping value too, that would be great.
Steering wheel?
Uhhhh.... the airbag has deployed in it
mattnz
29-12-2014, 07:54 AM
Uhhhh.... the airbag has deployed in it
I see that :P
iirc it's not too hard to switch over an airbag?
I'm more concerned about the state of the leather?
I'll try to get a decent pic of it so you can see it
Robotnik123
01-01-2015, 12:25 PM
Do you have an AYC pump available?
Tony_T
02-01-2015, 10:33 PM
Did yours have TCL? If so do you still have the vacuum canister and the two solenoid valves on the firewall?
Do you have the load cover (Holland blind-like thing) for the back - might be a bit costly to ship though? But just remembered I know someone who drives up and down so might be able to collect for me if he still does.
Did yours have TCL? If so do you still have the vacuum canister and the two solenoid valves on the firewall?
Do you have the load cover (Holland blind-like thing) for the back - might be a bit costly to ship though? But just remembered I know someone who drives up and down so might be able to collect for me if he still does.
No TCL, It did have a cargo blind, but I think my brother has it in his garage... I'll have to ask him about it.
Do you have an AYC pump available?
Yep, at this stage I do
Few more bits I removed today after being sick for the past week...
70986709877098870989709907099170992709937099470995 709967099770998
The steering wheel pics are to show how worn it is.
All the door cards are in this kind of condition, eg mint.
Tony_T
04-01-2015, 09:08 PM
Thanks Kayne.
It seems the guy who used to travel now has a new job so doesn't anymore but I'd still be interested in that blind if the freight wasn't too bad on it: wouldn't have to be by anything fast so the cheapest method would be fine if it turns out that you still do have it.
Someone else replied to me about the TCL parts, I got a notification of the reply but can't seem to find the actual post anywhere to read so if they could post it again here or send me a message it would be good, thanks.
I've just discovered that my '97 car is missing some more bits too but from the damage on yours I think they'll be destroyed so I'll have to go back to pickapart and see if the legnum VR-4 they've got there has the bits I want undamaged. I noticed that the TCL bits were there but someone had broken them deliberately to make getting other bits off easier ... damn!
Robotnik123
04-01-2015, 09:52 PM
Yep, at this stage I do
Hi there, obtained a pump off trademe. Thanks anyway.
Tony_T
07-01-2015, 03:58 AM
Kayne, sorry to be a nuisance: I got a load blind locally today. $50 just needed cleaning and some of the felt pads glued down at the edges, would have cost quite a bit of that for freight alone so thanks anyway.
Johny
07-01-2015, 05:48 AM
is the driver side monsoon shield intact?
Kayne, sorry to be a nuisance: I got a load blind locally today. $50 just needed cleaning and some of the felt pads glued down at the edges, would have cost quite a bit of that for freight alone so thanks anyway.
No worries man
is the driver side monsoon shield intact?
Ah... no.... it shattered in to a million pieces
mattnz
07-01-2015, 09:52 PM
Thanks Kayne.
It seems the guy who used to travel now has a new job so doesn't anymore but I'd still be interested in that blind if the freight wasn't too bad on it: wouldn't have to be by anything fast so the cheapest method would be fine if it turns out that you still do have it.
Someone else replied to me about the TCL parts, I got a notification of the reply but can't seem to find the actual post anywhere to read so if they could post it again here or send me a message it would be good, thanks.
I've just discovered that my '97 car is missing some more bits too but from the damage on yours I think they'll be destroyed so I'll have to go back to pickapart and see if the legnum VR-4 they've got there has the bits I want undamaged. I noticed that the TCL bits were there but someone had broken them deliberately to make getting other bits off easier ... damn!
I've got some TCL bits as well if you get stuck. Not sure if they work, but the cylinder isn't broken in any obvious way.
Tony_T
08-01-2015, 03:25 AM
Matt, really just need the solenoid valve with the single nipple and the blanking cap. Was going to hold the canister and the other solenoid for spares just in case of later needs so not essential. Don't want to hijack Kayne's thread though.
More parts off the car
7114871149
Wheels are now sold
711507115171152
Johny
18-01-2015, 08:43 AM
how much for those wheels?
$350 as is
I don't know if they need repairing or not, the faces seem to be the only bit's with any damage. Comes with 2 good tyres and 2 stuffed ones.
scott.mohekey
18-01-2015, 11:08 PM
You wouldn't happen to have an air compressor?
I think I have one laying around my garage somewhere....
CANDEE
19-01-2015, 04:42 AM
Gearlever surround?
CANDEE
19-01-2015, 08:26 PM
Do it come with the boot?
CANDEE
20-01-2015, 10:20 AM
Sweet, send me some bank details and drop it off to Scott and he will add it to my pile. :)
Bender
21-01-2015, 10:12 PM
....
Wheels are sold.
For the people interested in the Gearbox, gear linkages and engine parts, I have been working on getting my engine back in the Galant, so haven't had time to pull these ones out, should be sorted in a couple of weeks.
Jnic0
23-02-2015, 04:30 AM
I'm keeping the engine, so I don't need the loom.
It's in good condition
are you selling the bov?
I have a factory Evo 9 Metal BOV for sale
low_vr4
23-02-2015, 09:09 PM
How much for gearbox including shipping to wellington?
Jnic0
23-02-2015, 10:29 PM
I have a factory Evo 9 Metal BOV for sale
Is that the one on trade me? If so how does it differ from plastic evo 9 one?
low_vr4
23-02-2015, 10:41 PM
Is that the one on trade me? If so how does it differ from plastic evo 9 one?
I think the metal ones can withstand a higher level of boost pressure = less leakage.
Yes it is on Trade Me
As said above, they are less likely to have boost leak issues and I believe have a stronger spring in them.
Overall they are a much better improvement over the stock plastic ones.
Jnic0
01-03-2015, 12:21 PM
Yes it is on Trade Me
As said above, they are less likely to have boost leak issues and I believe have a stronger spring in them.
Overall they are a much better improvement over the stock plastic ones.
Oh Ok. What kind of noise does it make and is it adjustable or is it full recirc? Sorry not too familiar with the evo 9 bovs
Johny
02-03-2015, 07:31 AM
does the drivers seatbelt still retract normally?
miss dani nz
02-03-2015, 04:23 PM
rear diff and ayc do u have it for sale?
does the drivers seatbelt still retract normally?
I'll have a look tonight
rear diff and ayc do u have it for sale?
Sorry already sold the AYC diff
Bender
03-03-2015, 05:56 AM
rear diff and ayc do u have it for sale?
Sent a pm to kiwigalant he has a ayc diff for sale
Mr.Salas
16-03-2015, 04:32 AM
Do you still have the maf sensor? If yes how much
Thanks,
Chris
Yep I do
$40 + freight
Sorry for the delayed reply, I have been away on holiday
LapseNZ
22-03-2015, 06:56 PM
You got the boost solenoid valve?
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.