PDA

View Full Version : Evo & rs Axles



poloquet
28-12-2014, 12:36 AM
Hey guys my inner cv joint is gone. I want to know if i can fit an evo 7 rs Axle on my Vr4. Any ideas

Nick Mann
28-12-2014, 01:48 PM
The fitments are mostly the same but I don't know about lengths. I think the rs had a rear lsd so the inner shaft connection will be different to an ayc equipped car.

swinks
28-12-2014, 02:22 PM
There is some similarity between ayc and sayc rear diffs from Evo 7-9 and vr4, not sure about driveshafts, but I assume that lenghts may be different due to difference in rear knuckles etc, and body/chassis wideness. Evo 7-9 rs diff is different to ayc tho, IIRC different splines etc, and anyone who is after conversion ayc to rs/lsd diff needs to get also rs driveshafts due to difference.

poloquet
28-12-2014, 09:01 PM
Aiight thanks wanted to change out the entire axle cant get a VR4 axle anywhere. From the part numbers cant get it to. Had a evo 7 axle lying around wanted to know if it could work.

Nick Mann
28-12-2014, 11:16 PM
Which one? Can you lay them side by side and compare?

swinks
29-12-2014, 09:45 AM
If you after rear driveshafts from vr4 I may still have one from my vr4 laying somewhere in the loft. Let me know.