battery height??

[jahooli]

Any idea on max height, the battery I wanted wont fit due to lpg ecu install so the company are recommending both of these, the cheapest and highest is 220m

http://www.tayna.co.uk/069-Enduroline-Car-Battery-640CCA-P8384.html

http://www.tayna.co.uk/Optima-Red-Top-Battery-RTS-4.2-P9088.html



any thoughts?

[Davezj]

i presume the ECU is bolted to the plastic battery surround.

you could remove the battery sround and make a bracket to mount the ECU on then you can fit the battery you want to.

[jahooli]

No, the ECU is bolted to the side of the car next to the battery, there is a couple of mil clearance, i can get a bigger one in, just not the size I ordered.
Any ideas on the height, I have the other dimensions nailed but cant find out how high Im allowed to go. This enduroline http://www.tayna.co.uk/069-Enduroline-Car-Battery-640CCA-P8384.html is 220mm, my existing battery is 195.
any idea, I could do with oredering tomorrow, i think both batteries are OK power wise, just dimensions.

thanks
Paul

[jahooli]

any ideas on height lads?

[MarkSanne]

I have that Optima myself and it fits, only issue is that because it's lower the two threaded 'bolts'/bracket to hold the battery in place needs to shortened or use some spacers. I cut them down and bent new holding bends.

[jahooli]

fantastic, thanks.