Stock Exhaust Hanger/Bracket

[Erni902]

Hey guys just wondering if anyone knows if the exhaust bracket in the below picture is a STOCK bracket on a Legnum.

This one has lost its structural integrity and the passenger side backbox/tailpipe is hanging a bit lower which is in turn causing undue stress on the mounting rubber and possibly caused the inner of the downpipe flexi's to crack.

If I can get a decent replacement as opposed to having a garage weld a bespoke bracket on then all the better.

71787

Any help much appreciated

[TAR]

I dont think thats an original hanger.

The other one in the image is the standard one at the very back. There is another bracket which holds the standard backbox by the wheel arch, its held in by 2 10mm bolts.

:happy:

[Erni902]

Cheers Tim, I only noticed the other hanger after I had taken the picture and assumed that was the original one.

[Nick Mann]

I would agree with Tim.

[Erni902]

Cheers Nick, new custom bracket made by the garage it is.