PDA

View Full Version : TDO4 Turbine Upgrade – TDO4HL 9 Blade?



Davezj
05-02-2016, 07:11 PM
Hi guys, does this look like truthfully information?
does this look like a valid possibility for people considering a TD04 upgrade.
if so what sort of difference do you think it will make.

The below information is copied from this location.

http://turbolabofamerica.com/tdo4-turbine-upgrade-tdo4hl-9-blade/

TDO4 Turbine Upgrade – TDO4HL 9 Blade

1 Reply (http://turbolabofamerica.com/tdo4-turbine-upgrade-tdo4hl-9-blade/#comments)



http://turbolabofamerica.com/wp-content/uploads/2015/02/TDO4-Turbine-Upgrade-300x202.jpg (http://turbolabofamerica.com/wp-content/uploads/2015/02/TDO4-Turbine-Upgrade.jpg)

TDO4HL 9 Blade VS 12 Blade

The MHI TDO4 Turbos Are One of the Smallest Turbos to Upgrade. Luckily, there is an TDO4 Turbine Upgrade!



Here are the specs of the TDO4 Series Turbos:
TD04 = 40.0mm exducer, 47.0mm inducer
TD04L = 41.3mm exducer, 47.0mm inducer
TD04H = 44.2mm exducer, 52.0mm inducer
TD04HL = 45.6mm exducer, 52.0mm inducer
Normally all the MHI Shafts are 12 Blade, But We were Fortunate Enough To Get Our Hands on TDO4HL 9 Blade Turbine Shafts! We use these for Service and also Sell them!
The TDO4HL 19T Turbos are capable of 325hp and 400+ FT/LB torque with the Factory TDO4HL Turbine. Now You Have the Ability to Get Back More Horsepower at Higher RPM Which is When the Engine Starts to Outflow What the Turbo is Capable of with the 12 Blade Turbine.
This is an Excellent Upgrade for:


Volvo TDO4HL Turbo Upgrade (Direct Fit)
Subaru 13T TDO4L Turbo Upgrade (Machining Required)
Hyundai Genesis TDO4L 13T Turbo Upgrade (Machining Required)
Hyundai Genesis TDO4HL 19T Turbo Upgrade (Direct Fit)
3000GT TDO4 Turbo Upgrade (Machining Required)
Dodge Stealth TDO4 Turbo Upgrade (Machining Required)
Saab TDO4 Turbo Upgrade (Machining Required)
Acura RDX (May Require Machining)

Details About 9 Blade TDO4HL Turbine:


45mm x 52mm
9 Blade Outflows and Outspools 12 Blade
Lighter Weight as Show Below Comparing 9 Blade and 11 Blade
Balanced and Ready To Install
Excellent Upgrade for 19T (46.7mm), 20T (47mm), or 50 x 62 x 65mm Billet Wheel
We also sell T
DO4 Upgraded Rebuild Kit Here (http://turbolabofamerica.com/tdo4-tdo4h-tdo4l-tdo4hl-turbo-rebuild-kit/)



http://turbolabofamerica.com/wp-content/uploads/2015/02/tdo4HL-9-blade-111x300.jpg (http://turbolabofamerica.com/wp-content/uploads/2015/02/tdo4HL-9-blade.jpg)

http://turbolabofamerica.com/wp-content/uploads/2015/02/Tdo4hl-11-bl-weight-111x300.jpg (http://turbolabofamerica.com/wp-content/uploads/2015/02/Tdo4hl-11-bl-weight.jpg)







Visit Link Below To Purchase:

adaxo
05-02-2016, 08:11 PM
I wish I have td04 bolted on at first place, then, when power increase become boring, looking for upgrades

Davezj
06-02-2016, 12:50 PM
Yes Ha ha