PDA

View Full Version : radiator cooling plate



volfernion
12-02-2016, 02:29 AM
https://www.drive2.ru/l/8931079/

74659

Colin Wiltshire
12-02-2016, 11:11 AM
Did you make this or buy it? I've been after 1 for mine

volfernion
12-02-2016, 11:13 AM
I make it

Davezj
12-02-2016, 02:31 PM
What are you suggesting this plate will do, apart from making it look pretty?
It does look pretty.

One other thing it will do is ensure the standard air box snorkel will not fit any more.

Confused
12-02-2016, 03:09 PM
The theory behind a "cooling plate" is that it will force more air through the radiator, rather than allowing it to bypass the radiator by going above it.


Mostly, though, they tend to be installed for looks, rather than for actual cooling performance reasons.

volfernion
12-02-2016, 04:12 PM
Did you make this or buy it? I've been after 1 for mine

Can make some one)

Pugme
12-02-2016, 04:21 PM
If you fancy making another. I'll have one

What sort of price delivered to the UK?

volfernion
12-02-2016, 04:36 PM
work 63 usd if satisfied
+
sent need to count up

volfernion
12-02-2016, 04:36 PM
If you fancy making another.

do not quite understand

Grid
12-02-2016, 05:15 PM
If you fancy making another.

do not quite understand

fancy something = want something. Pugme is asking if you want to make one for him.

volfernion
12-02-2016, 05:23 PM
difficulties of translation))) If I understand the question is, if I want her to be apart from me?)

Humpty's Revenge
12-02-2016, 05:35 PM
difficulties of translation))) If I understand the question is, if I want her to be apart from me?)

What members are asking is can you make more ?

volfernion
12-02-2016, 05:51 PM
yes )

Colin Wiltshire
12-02-2016, 06:35 PM
I will take one please, Price?

Humpty's Revenge
12-02-2016, 06:40 PM
work 63 usd if satisfied
+
sent need to count up


I will take one please, Price?/Hmmm

Pugme
12-02-2016, 07:16 PM
Haha

How much for postage?

adaxo
12-02-2016, 08:50 PM
volfernion you may organise GB?






































:laugh:

:coat

volfernion
13-02-2016, 05:16 AM
International mail is not a question. Always I send to Israel.

You can make a list - if so send a few together. Cheaper will.

Because the payment is for the mere fact of sending + on per kilogram weight. Today, I count the cost

volfernion
13-02-2016, 05:56 AM
How use my own avatar - can not find:thinking2

Nick Mann
13-02-2016, 11:30 PM
How use my own avatar - can not find:thinking2

Registered User = no custom avatar. You must be a paid member.

legnum j
17-02-2016, 05:05 AM
Pm sent for interest in cooking plate

vr4drifta
17-02-2016, 10:14 AM
i might be able to get them made here which would bring the cost down i will look into it this week if anyone has any ideas on improving it then let me know

Davezj
17-02-2016, 02:35 PM
i might be able to get them made here which would bring the cost down i will look into it this week if anyone has any ideas on improving it then let me know

if you want better air flow through the radiator use expanding single sided tape round the joint between A/C rad and coolant Rad and tape the joint between A/C rad and chassis metalwork. I do not believe the plate will help cooling for one thing , it only addresses one edge of the coolant radiator to A/C rad joint there three others, and is not fitted tightly enough to the top of the coolant rad to seal the joint there.

don't get me wrong it is nice thing to look at as a dress up the engine bay piece and will probably help you stop burning you finger when you lean on the top of the Radiator (particularly the people with after market alloy rads) but don't expect it to bring coolant temps down.
Oh the other thing to remember is this plate has been made to fit a standard Factory Rad after market rads will probably have the top rad hose mounting point and filler cap in a slightly different place to the stock one so you may have to start modifying the plate to make it fit and after market radiator. measure you positions to make sure.

i am not have a go at the guy that has made this plate it looks nice, I am just being realistic, and i don't think i am offending him by saying this. The guy that has made this plate has not claimed this plate will will do anything, it is just a plate, and it looks nice, that is all.

By the way the original a/c Rad was sealed to the coolant rad and the chassis if i remember rightly with tape in the Non VR4 galant but this tape has long since crumbled away to nothing. I dont belive the VR4 was sealed from the factory at all.

MarkSanne
17-02-2016, 04:40 PM
vr4drifta! you're back!?! hi Amesh.

--sorry for messing up the thread--

Pugme
17-02-2016, 11:50 PM
I'm just looking for pretty and shiny.....

Cooling is at the bottom of my list :-)

Davezj
18-02-2016, 12:33 AM
i always like a bit of BaBling, BaBling.

i am just not very good at it.

volfernion
20-02-2016, 05:04 AM
That payment shipping cost.
The exact weight of the plate do not know - put about.
Appropriately for the calculation of one 15 USD
and three 24 USD

It should be specified directly on the post office + small packaging costs


74708
74709

legnum j
23-02-2016, 02:02 AM
How much for cooling plate and delivery to limerick,ireland??

volfernion
12-03-2016, 07:03 PM
almost the same