known working stock FPR & fuel pump resistor pack

[crazydriver81]

Ok chaps, I am looking for some random parts. I suspect my FPR has gone and I would need a replacement for that. I have one from a V6 here but it is rated higher according to the workshop manual. Don't know if it will lead to overfuelling, so a working stock one will be the way to go...

The other thing I need is the resistor pack which is located at the bulkhead in the engine bay. As I am too lazy to run a new wire and another relay to the boot, I need it to bridge the resistor to have full 12V at the fuel pump.

Would be great if somebody can help me with that. Thanks!

[crazydriver81]

bump

[Davezj]

no you dont need a resistor pack, you just need to connect the wires that would have gone to the resistor pack together to bypass it. this will give the fuel pump full battery voltage all the time.
the resitior pack does not neeed to be fitted to the car at all.