td03 mods

[paulg23]

Hi All

Been loads of threads here and on the OZVR4 site but none seem to come to a conclusion... they all seem to just die. Anyhow. Has anyone succeeded in modifying a td03 to get more flow/boost? I know Brad tried but his nuts came off :quasi::rolleyes3. So not quite the dogs b@ll@cks... or perhaps it was!!!

I will be doing an engine/transmission swap soon and want to get as much out of it as possible without spending silly money.

Cheers All.

[billybobboot]

Biggest restriction is the cams just cant keep up at high rpm but the stock turbos start to struggle flowing enough air at around 1-1.1 bar this isnt helped by stock cams.
Wanna keep stock turbos get them ported and get the cams done

[hbkuk1]

I have cams and it still struggles to hold 1.1 bar past about 5k rpm it's the turbo size is the problem

[foxdie]

Yep plus running the turbos at those pressure levels up to redline is going to cause some serious overheating. Best make sure you've got an oil temp gauge :thumbsup: