Factory Base Tune for Kenneth's ECU Mods

[Caulton]

Hi All,

Does anyone have a port of the factory ECU tune to Kenneth's ECU Mods ROM? Looking for a base factory tune to start working with.

[Davezj]

Keneths 1.03 rom is fine to use straight out of the box. a perfect start point.

if i remember rightly the ignition timing is factory setting.

the fuel has been leaned out to 11.00 afr which is ok.

the boost is set to about 0.8 bar.

the fuel cut is set as factory standard.

you just have to turn the lauch control off and antilag off to make it standard.