replacing factory intercooler

[jaysojdm242]

Yo i recently found that my factory intetcooler has a hole at the bottom of it. Is there any other intercooler that can fit in its place without changing the charge pipes? I.e. evo 1-10 factory intercooler or anything along the lines?

[Davezj]

there are plenty of options, but you have to replace the 2 flex hoses that enter the intercooler and make a braket to mount the intercooler from.

total cost about £110 for a intercooler with core size 600mmx300mmx76mm

pleanty of threads on here about buying, fitting, ect.

[jaysojdm242]

there are plenty of options, but you have to replace the 2 flex hoses that enter the intercooler and make a braket to mount the intercooler from.

total cost about £110 for a intercooler with core size 600mmx300mmx76mm

pleanty of threads on here about buying, fitting, ect.
Ok thank you ill have to look around because i live in the bahamas we have more evos here than vr4s so i just wanted a quick fix

[Davezj]

i believe you can use an evo intercooler but they are much more expensive over here and they are smaller, so nobody bothers with them.

all the parts are available on ebay for the 600x300x76 just search for that on here or ebay and see the results.

[Pugme]

As a tip you will need one 90 degree 2.5" to 3" and one 45 degree 2 5" to 3" silicone