Pugme
16-10-2016, 08:27 PM
OK guys!!
If I have to split, I have to split. So what do we have!!
Engine, engine is on circa 100k because after the manual conversion the speedo never worked due to a failed speed sensor in the box. Clocks read 90k from memory and i only drive the car to shows.
Here's a breakdown of goodies
2.5"-3" downpipes
Full 3" straight thru system
Walbro fuel pump
300X600x76 FMIC
R2D2 dump valve
Tweaked 7202 (I think) ecu with upped boost and fuel cut
Magnecor leads and br7x... Spark plugs or something
Aircon pump not there
Working ayc pump
Diff
Full solid eurothane engine mounts
Engine is all good, both turbos spool well, although it does burn oil, it hasn't bothered me, I just keep it topped up but again as said I only drive to shows. No oil leaks or patches on my street so must be burning it
Manual gearbox and peddle box, brand new in box stage one evo clutch and release bearing, b&m short shift kit fitted, evo clutch conversion plate
Now, it's easier for me to sell the whole kit and kaboodle as one... For this I'm looking £1800
If not, I'm looking £1000 for the full manual conversion including the nick mann adaptor, the brand new in box clutch and release bearing, fitted short shift, peddle box and manual clocks
So let's see how this goes. I'm on route home from Rotterdam now, will do a cold start video from the deck in the morning which I will upload to YouTube.
This advert is based solely on engine and drivetrain types of bits and bobs, as I will still have the car parked on the road for now.
If I have to split, I have to split. So what do we have!!
Engine, engine is on circa 100k because after the manual conversion the speedo never worked due to a failed speed sensor in the box. Clocks read 90k from memory and i only drive the car to shows.
Here's a breakdown of goodies
2.5"-3" downpipes
Full 3" straight thru system
Walbro fuel pump
300X600x76 FMIC
R2D2 dump valve
Tweaked 7202 (I think) ecu with upped boost and fuel cut
Magnecor leads and br7x... Spark plugs or something
Aircon pump not there
Working ayc pump
Diff
Full solid eurothane engine mounts
Engine is all good, both turbos spool well, although it does burn oil, it hasn't bothered me, I just keep it topped up but again as said I only drive to shows. No oil leaks or patches on my street so must be burning it
Manual gearbox and peddle box, brand new in box stage one evo clutch and release bearing, b&m short shift kit fitted, evo clutch conversion plate
Now, it's easier for me to sell the whole kit and kaboodle as one... For this I'm looking £1800
If not, I'm looking £1000 for the full manual conversion including the nick mann adaptor, the brand new in box clutch and release bearing, fitted short shift, peddle box and manual clocks
So let's see how this goes. I'm on route home from Rotterdam now, will do a cold start video from the deck in the morning which I will upload to YouTube.
This advert is based solely on engine and drivetrain types of bits and bobs, as I will still have the car parked on the road for now.