Pugme
08-12-2016, 08:59 PM
ok. not 100% sure what i have under there... because i bought the kit and gave to a garage to install back in 2010 when i still wasnt fully clued up, but i am stripping it all off this weekend so thought id post up and see the interest
ok front camber correction i have a pair of ingalls adjustable ball mounts, and on the rear i have adjustable camber bolts on the upper arm (obviosuly i used them to induce camber, their actual use is to help correct negative camber caused by lowering £75 posted
so the polybushing... the only ones i know i played with and possibly swapped out (need to find if i kept the bushed ones) were the upper rear arms because i had them altered for more negative camber
but here is a list of what i originally bought and at this moment as far as i know, this is what i have to remove
FRONT END CONTROL ARM BUSHING SET
4x lower control arm bushing outer
2x lower control arm bushing centre
2x lower control arm sleeve
4x upper control arm bushing
4x upper control arm sleeve
REAR END CONTROL ARM BUSHING
2x lower trailing arm
2x lower trailing arm sleeve
6x rear knuckle
6x rear knuckle sleeve
4x upper control arm
4x upper control arm sleeve
FRONT SHOCK BUSHING
uppers only
2x upper position shock bushing
2x lower position shock bushing
REAR SHOCK BUSHING
uppers only
2x upper position shock bushing
2x lower position shock bushing
im hoping to drop the arms etc in large pieces rather than one at a time, i dont really have a plan but pictures will be coming. let me see what i drop off the car before i think of a price on these.
Ok polybush setup is all good, the shock mounts are staying in the shocks so its just a full chassis set which is all good and ready to bolt onto your car (so no need to get a workshop to press them in) £150
ok front camber correction i have a pair of ingalls adjustable ball mounts, and on the rear i have adjustable camber bolts on the upper arm (obviosuly i used them to induce camber, their actual use is to help correct negative camber caused by lowering £75 posted
so the polybushing... the only ones i know i played with and possibly swapped out (need to find if i kept the bushed ones) were the upper rear arms because i had them altered for more negative camber
but here is a list of what i originally bought and at this moment as far as i know, this is what i have to remove
FRONT END CONTROL ARM BUSHING SET
4x lower control arm bushing outer
2x lower control arm bushing centre
2x lower control arm sleeve
4x upper control arm bushing
4x upper control arm sleeve
REAR END CONTROL ARM BUSHING
2x lower trailing arm
2x lower trailing arm sleeve
6x rear knuckle
6x rear knuckle sleeve
4x upper control arm
4x upper control arm sleeve
FRONT SHOCK BUSHING
uppers only
2x upper position shock bushing
2x lower position shock bushing
REAR SHOCK BUSHING
uppers only
2x upper position shock bushing
2x lower position shock bushing
im hoping to drop the arms etc in large pieces rather than one at a time, i dont really have a plan but pictures will be coming. let me see what i drop off the car before i think of a price on these.
Ok polybush setup is all good, the shock mounts are staying in the shocks so its just a full chassis set which is all good and ready to bolt onto your car (so no need to get a workshop to press them in) £150