rear wiper delete

[Qotato]

does anyone know the size of the rear wiper arm hole in the glass so i can purchase a bung in the correct size. the thread on my assembly has threaded and i cannot easily get the wiper arm off to then remove the assembly. id like to purchase a bung before chopping off the arm and removing the assembly. thank you in advance.

[jaspa]

The hole left when you remove the wiper arm and mechanism is 15mm. There is also then a 24mm nut which i havent removed.

I was a tad zealous when removing my motor but i can send you it up if it helps, just cover the postage costs. I dont have the arm im afraid and cant remember what else was inside the mechanism but you should be able to get a working one out of the two. Drop me a pm if you want.

Hth

Stuart.

https://uploads.tapatalk-cdn.com/20170530/2f4ded47e5f3ff0d243efcdf22679d9e.jpg

77496

https://uploads.tapatalk-cdn.com/20170530/1c2579665d193fca912bdd0db16cd2f1.jpg

77497

https://uploads.tapatalk-cdn.com/20170530/d656ff8b915597094f24129cfb9fe1d8.jpg

77498

Sent from my SM-N910F using Tapatalk

Edit - What do the pics only sometimes show up properly when I use tapatalk?

[Qotato]

thanks for the info il get hold of a few different styles of bungs then i can finally sort out by dodgy wiper assembly :D.